Question about leaking possibilities with Danner Mag 3

Alright, so I'm trying to whip together a relatively cheap yet good performing water cooling system for my hopefully upcoming A64 system, and for such, I've chosen the Danner Mag 3 as the best bang for the buck...the only problem is, I know it's been known to leak frequently...so what would be quite helpful would be if someone could post a pic of where exactely it usually leaks or of a pump with some sealent applied so I know what I'll have to do before installing my system to make sure leakage won't be a problem. Thanks!

http://www.procooling.com/articles/html/magdrive_tips_-_joe___3_31_00.php

also, there are TONS of threads about this. do a search for mag 3 seal or mag 3 leak and you can easily find lots of people talking about it.

you dont necissarily ahve to do this. i did it and made my pump a mess of silicone sealant. eventually i took all the silicone off, and it still doesnt leak

I used the exact same silicone featured in the Pro Cooling article to seal up my Mag 3. Use plastic fittings though. Metal is a no-no. Metal fittings can crack the housing.