yont
12-02-04, 07:45 PM
:confused: I have a DFI CA64-TC board with 512mb’s of 133 sdram. I have a Celeron 1.3 Tualatin that’s got a 100 mhz default bus. The default vcore is 1.5 volts in which allowed me to clock with the setting of 110/36. Well this setting worked at 1.5 volts. Now there was final setting of 120/30 that I wanted to try to hit but could not at 1.5 volts so I did the mod to bring the vcore to 1.75, but still will not post. This board doesn’t offer slow increases…just a fix setting that you choose, 4 to be exact, default, 104/34, 110/36, and 120/30. Is there a bios I can use to help or a program to change the bois options or is there a way to get the bios settings to except the 120/30. I feel that 1.75 should be enough to get 120/30. I had this CPU at 1.80 with 124/41 on another board blazen but the board took a crap. (dropped a piece of metal inside) Since the PCI freq is even lower on this last setting that it should work. Do I need to hit 1.80 or 1.85 to work? Any help would be appreciated……L Tony Hernandez