I need O/C settings for my new 1.4 Athlon,KG7-R and DDR

[MeJa]

Guys i just got my new Abit KG7-R , Athon 1.4 266fbs and 512 DDRam 2100 and i was woundering what's the best setting i should use for the Soft Menu III? At what speed should i have the multipliers? What should be the best combination between the muliplier and the FBS. Also what's settings should i have the FBS RATE 3:3:1 or 4:4:1 ?

Sorry for all the question i'im completetly new to DDR and this board as well :(

Thank you for tanking your time to help me out ;)

[MeJa]

:(

[n2]

well, i'd help ya if i was familiar with any of that stuff...

my systems:
iwill KK266-R
512 PC166 micro-BGA SDR
Duron 800

iwill KK266
512 PC166 micro-BGA SDR
Duron 750


as you can see, i know not!
but the guides on the front page should help alot.
for example, you need to first start stock, then install all O/S and drivers... make sure the stuff even works...
and as you learn the "art" of overclocking, you gradually bump up.

you don't just jump in and hit 2gig, i'm sorry to inform :)
also, if i had the same hardware as you, i'd bet any money my results would be very different... you ask a question which we can't answer... you have to find out for yourself.
first with our database as some guidance, then onto beginner guides for the basics and foundation.

[MeJa]

i've o/c two diff systems already (not the greadtes) but i'm not familiar with this new board and neither with the DDR settings, so i was woundering if maybe one of the gus working with this motherboard can help me out, cuase there's alot of stuff there ahtat i dont know what to set it as.

But Thx alot for taking your time ;)

[TranceBear]

Originally posted by MeJa
i've o/c two diff systems already (not the greadtes) but i'm not familiar with this new board and neither with the DDR settings, so i was woundering if maybe one of the gus working with this motherboard can help me out, cuase there's alot of stuff there ahtat i dont know what to set it as.

But Thx alot for taking your time ;)

Try this BIOS tweak guide, it will work for most M/B's BIOS'

http://www.rojakpot.com/Speed_Demonz/BIOS_Guide/BIOS_Guide_Index.htm

Good Luck!!

[dborden]

Great setup guy! Same as me.

Ok first of all you should be able to set your setting to this:

11x140fsb 1.85 vCore
Use the default 3:3:1 or 4:4:1 which one is default selected is what you want to use. I forget which one.

Try case 2 memory timing with turbo setting. Leave the rest alone. If your video locks up during 3d turn off video bios shadow and turn off sidebanding. Also set agp to 4x and your set!