Asus TUSL2-C and Celeron 900mhz...

[Sarlok]

Hey,

I've got a celeron 900mhz in an Asus TUSL2-C mainboard (aka. "The Perfect Fit"), and I figure I should be able to overclock it to at least 1.15 or 1.2 ghz before I start having problems...

I've only overclocked one other computer, (my brother's Celeron 400mhz ~ 500mhz) so I wanted to know if I have to change the voltages or anything for it to operate any higher than 900mhz? (Voltage is currently 1.75).

And will I have to change the PCI bus speeds or anything else as well?

Thanks.

[Wicked Klown]

You might not have to increase the voltage try to hit your mark once if you can run a benchmark if not stable increas voltage til it does be come stable. As far as the PCI`s not really sure most of the new MoBo will adjust speeds by themselfs.
I hope this helps you and good luck.

[Sohryu Asuka Langley]

you cant change the PCI divider on a TU or CU and the voltage limit is 1.8v (i think) without vid pinning.