PDA

View Full Version : I need a 80mm Radiator dual for cheap


Vengance_01
12-16-04, 12:29 PM
I am thinking Heatercore style. If anyone can point me in the right direction? :santa2:

EDIT** its for my X800XT PE. I wanna put it on a seprate loop :bday:

Bugsmasher
12-16-04, 12:37 PM
Quick question...

Any particular reason to get a dual 80mm instead of a single 120mm? Normal 80mm fans are pushing around 30cfm while a 120mm will push up to 100cfm (Sanyo Denki) without creating too much noise. For a footprint of around 6x6 the '86 Chevette heater core should be able to handle a single vid card with little or no problem.

$25 '86 Chevette HC
$10 Shroud
$ 5 Sanyo Denki

$40 + GPU block for a really nice setup.

Vengance_01
12-16-04, 12:44 PM
Well I have Cheiftech case and I really have no room for another 120mm heatcore as i am using Dual 120 to cool my cpu. I have the empty space where two 80mm fans used to be. Thus I will create a seprate loop for each using 1/2 tubbing.

Omnious
12-17-04, 03:33 AM
why not just tap into your current loop? i have a single 120mm with a RBX and maze 4, and it works great. it sounds like it would be a pain to run 2 seperate loops, adding in another pump would be painful in my case

Vengance_01
12-17-04, 12:30 PM
why not just tap into your current loop? i have a single 120mm with a RBX and maze 4, and it works great. it sounds like it would be a pain to run 2 seperate loops, adding in another pump would be painful in my case Problem is I am adding the Swity MCW50-T which is a 80watt pelt cooling the card. I know its gonna be hard, but I hope my cheiftec can handle everything =)

sandman001
12-18-04, 10:10 AM
Not to ruin your party or anything, but I doubt an 80watt pelt will handle the X800XT PE.

I'd look into a 172watt pelt.....

More on Topic. Make one.

Take some copper tubing, and add heatsink to it, and have a fan blow past them and out the 80mm fna holes.

creepy
12-18-04, 02:59 PM
I agree with sandman on this one. Once again not to ruin the party but I wouldnt even waste your time with a "swifty" mcw-50t. I had one for awhile and it didnt work for ____.

Vengance_01
12-19-04, 12:47 PM
Well I can switch for a 172, but I have word from Hellfire@XS says it will work, so I am still gonna try it. It will still be better than straight water and I already have it