Great cooling products available at allelectronics.

[dimmreaper]

Just want to share with all you cooling buffs some of the great products available at http://allelectronics.com Click on the Photos for more info.

This looks like it may fit a SocketA MoBo with four mounting holes in a 2" x 2.5" rectangle. This might cool a Duron acceptibly Only $14
http://www.allelectronics.com/images/gold/full/CF-103.jpg (http://www.allelectronics.com/cgi-bin/category.cgi?category=220&item=CF-103&type=store)

This is the fully skirted RISC CPU cooling Panaflow Orb, only $22.50.
http://www.allelectronics.com/images/gold/full/CF-75.jpg (http://www.allelectronics.com/cgi-bin/category.cgi?category=220&item=CF-75&type=store)

This is a Panaflow Orb similar to the one above, except without the skirting, and it has a flat side on it. Only $17!
http://www.allelectronics.com/images/gold/full/CF-82.jpg (http://www.allelectronics.com/cgi-bin/category.cgi?category=220&item=CF-82&type=store)

Did somone say blower? How about a 5" 115VAC "cage blower". Only $8 a piece (they are used though)
http://www.allelectronics.com/images/gold/full/CF-80.jpg (http://www.allelectronics.com/cgi-bin/category.cgi?category=220&item=CF-80&type=store)

Allelectronics carries many many fans, and other odd looking heatsink, I do suggest that serious cooling enthusiast check them out.

[MeJa]

You use water cool in your system right? is it any loud?

[dimmreaper]

Originally posted by MeJa
You use water cool in your system right? is it any loud? Yes. Mine is very quiet, I run a 115CFM Nidec 120mm fan, I run it at 7V to keep it quiet. And I have the fan blowing through a large F-250 heatercore. I'm going to be getting a smaller radiator so I can move my watercooling rig in to my case. Right now I have to remove the watercooling rig, and install a Millenium Glaciator, if I go to a lan party :(

[MeJa]

I'm ordering the kit on monday from becooling but there's two there that look good and like i said i dont know anything about them. which one out of these 2 would you recommend?
http://becooling.safeshopper.com/3/42.htm?676 or http://becooling.safeshopper.com/3/55.htm?676 ?

They're both the same price and they both come with the same waterblock and pump. but i dont know wich radiator would be better..

Any recommendation?

[dimmreaper]

I've asked the owner of BeCooling which radiator is best in the past, and he feels the AquaCoil with single fan is marginally better than the DualFan radiator with dual fans . . .

[MeJa]

That clear all my questions about the system i want! :)
I'll be ordering on monday and if i'm not mistaken you metioned to get their Danner Supreme Mag-Drive 250 instead of the one that comes with the kit, so i'll request to get that one maybe i can swap it for the one that comes with the kit.

Thanks for all your help!

I'll be getting another case on monday was well ;)

[dimmreaper]

I'm getting an Epox EP-8kha+ and Duron 1GHz next week, so long as the board is available next week, if it's not I'm waiting. Also might buy my new radiator next week, thinking of getting the AquaCoil as well . . . .

[LimeyGreg]

I have the good fortune to live in LA and have visited both the AllElectronics stores may times. I have numerous fans from them and also the heatsinks shown.

My HSF is presently the third picture, see my sig. The flat side provides clearance where the greenie is mounted on the mobo. I had to drill and tap the sink to make it fit my slot 1 proc. The nice thing about the fan is that you can run it at 17v (or higher, actually took it to 24v) without any problems, others fans I have tried have overvoltage shutdown, but not this panaflow.

I also have the blue HSF and the pins do not match the mounting holes of a Socket A mobo, I had asked for the dimensions of these holes about 6 months or so ago as I had the same thought.

[WyrmMaster]

They have 120mm panaflo fans with fangard for 6.50, less than half what the cooling stores chager, and they dont give you a gard.