- Joined
- Dec 20, 2001
So after wasting all day on this POS, I still can't get it to work. No matter where I have the jumpers set the MB thinks the CPUs are 3.2s and thats just not going to work with 1.3v
Sometimes the MB runs for less than a second and powers down, sometimes it runs for 10 and then powers down. If I hold insert, I can get into BIOS, and then it powers down. I had it stable in the BIOS at one point, and it was running quite cool 22c so I was happy with that.
Some one please tell me where the jumpers go, I have read the MB manual so many times, and tried so many different things. I just don't get it.
Also, anyone that has modded 1.6LVs to 1.6v please tell me exactly what needs to be done. 12h to get nothing accomplished is unacceptable. So are the hold times at ASUS.
Any insight would be great, because Im about to trash this MB.
Sometimes the MB runs for less than a second and powers down, sometimes it runs for 10 and then powers down. If I hold insert, I can get into BIOS, and then it powers down. I had it stable in the BIOS at one point, and it was running quite cool 22c so I was happy with that.
Some one please tell me where the jumpers go, I have read the MB manual so many times, and tried so many different things. I just don't get it.
Also, anyone that has modded 1.6LVs to 1.6v please tell me exactly what needs to be done. 12h to get nothing accomplished is unacceptable. So are the hold times at ASUS.
Any insight would be great, because Im about to trash this MB.