I can only get my celly to boot up at 83 or 100 mhz fsb

[Bmxpunk86pl]

Yeah, i got a celly 700mhz (stepping 6) and i overclocked it to 788 and i want MORE!!!!! so the next step would be 10.5*83Mhz but the problem is that it wount even boot to let me see my video card and samething happenes when i try 10.5*100mhz. I even brought up the vlotage from 1.70 volts to 1.90 volts and nada, nothing not even video card pops up. Am i stuck at 788?
system specs:
abit vl6 mobo
256 megs or pc133 ram
32 meg agp tnt2 m 64 card
onboard sound
8x4x32 cd-rw drive
52x cdrom drive
4.5 gigs of space(yeah i know that sucks but im gettin more)
oh yea and i have no way of adjusting the agp bus ratio

[Jon]

What type cooling are you using?

[Bmxpunk86pl]

im not sure but i guess its good because my temp is at 32 degrees celsius

[TUK101]

Your 32C may not exactly be accurate, with my comp, i found it to be about 4C off (too low). What kind of hsf are you running? And do you have any case fans? It sounds like you are getting too hot before you are able to post (get into windows). Let us know and the peaple in here should be able to help you. I used to have the same problem with an old Celeron that I had. It would only post @100fsb, and no other setting. Not 72 or 83, but only 100, so I didnt complain about that lol.

[JetMech]

Originally posted by Bmxpunk86pl
Yeah, i got a celly 700mhz (stepping 6) and i overclocked it to 788 and i want MORE!!!!! so the next step would be 10.5*83Mhz but the problem is that it wount even boot to let me see my video card and samething happenes when i try 10.5*100mhz. I even brought up the vlotage from 1.70 volts to 1.90 volts and nada, nothing not even video card pops up. Am i stuck at 788?
system specs:
abit vl6 mobo
256 megs or pc133 ram
32 meg agp tnt2 m 64 card
onboard sound
8x4x32 cd-rw drive
52x cdrom drive
4.5 gigs of space(yeah i know that sucks but im gettin more)
oh yea and i have no way of adjusting the agp bus ratio Is anyone getting a good overclock with a 10.5 multiplier?