Voltmod Resistor to use with Iwill KK266

[Mortdog]

I have read through some websites about which potentiometer or resistor to use when doing the voltage mod to pin 7.

30 K OHM it should be but It doesnt tell the wattage.

I bought a 30 K OHM 0.5 wattage today but I haven´t manage to increase the vcore. It doesnt affect the Vcore at all.

Is it possible that my wattage is to high?

[Mortdog]

Another question.

My cpu (1000 mhz axia) is now running at 1500 mhz 1.92 Vcore.
39 C Idle and 43 C Load. Taisol with Delta.

If I increase the Vcore to 2.0 or maybe 2.05 V and the cpu to 1600 I guess the temp will rise to 43 C idle and 47-48 C load. Is this safe numbers when having such high voltage?

[SickBoy]

Originally posted by Mortdog
Another question.

My cpu (1000 mhz axia) is now running at 1500 mhz 1.92 Vcore.
39 C Idle and 43 C Load. Taisol with Delta.

If I increase the Vcore to 2.0 or maybe 2.05 V and the cpu to 1600 I guess the temp will rise to 43 C idle and 47-48 C load. Is this safe numbers when having such high voltage?

Well... generally I'd say that if you're under 2.1 Vcore, the max you should go is what your cooling can handle. I like to keep my load temps under 47 C generally... I have an SK6. Which Taisol HSF do you have? The copper-based one?

Be careful when aircooling a voltmodded board... it's really easy to overpower your cooling.

SickBoy