Can anyone help me out with these settings?

[killem1x1]

I am including some of my AGP settings here as well, but mostly the mem stuff from the BIOS:
SDRAM ECC SETTING ?
SUPER BYPASS MODE ?
SDRAM PH LIMIT ?
SDRAM IDLE LIMIT ?
SDRAM TRC TIMING VALUE ?
SDRAM TRP TIMING VALUE ?
SDRAM TRAS TIMING VALUE ?
SDRAM CAS LATENCY ?
SDRAM TRCD TIMING VALUE ?

AGP STUFF------------------------
AGP APERTURE SIZE ?
AGP ISA ALIASING ?
AGP SECONDARY LAT TIMER ?
AGP FAST WRITE ?
AGP DATA TRANSFER MODE ?
AGP ALWAYS COMPENSATE ?
-----------------------------------------------
I have an epox 8k7a, with a 256mb stick of ddr/ 2 40gig HDD running in raid 0/ Visiontek GF3/
I am looking for the settings that will allow the highest FSB. Right now I can reach either 146x11.5 or 140x12, but the cpu will boot higher. I just need better Bios settings.
Thanks in advance!

[redduc900]

SDRAM ECC SETTING - Disabled
SUPER BYPASS MODE - Enabled
SDRAM PH LIMIT - 8 Cycle
SDRAM IDLE LIMIT - 8 Cycle
SDRAM TRC TIMING VALUE - 8 Cycle
SDRAM TRP TIMING VALUE - 2 Cycle
SDRAM TRAS TIMING VALUE - 6 Cycle
SDRAM CAS LATENCY - 2 Cycle
SDRAM TRCD TIMING VALUE - 2 Cycle

AGP APERTURE SIZE - 64MB
AGP ISA ALIASING - Unknown
AGP SECONDARY LAT TIMER - 20h
AGP FAST WRITE - Enabled
AGP DATA TRANSFER MODE - 4X
AGP ALWAYS COMPENSATE - Enabled

[Placid]

http://www.lostcircuits.com/motherboard/epox_8k7a+/6.shtml

http://www.rojakpot.com/Speed_Demonz/BIOS_Guide/BIOS_Guide_Index.htm

Between these 2 places everything should be covered.

[killem1x1]

Thses settings wil allow for the highest FSDB? Or, the fastest mem? Or both? Just curious....

[redduc900]

AFAIK, these settings should allow for the highest stable FSB. I helped a friend of mine set up his DDR board, and from what I remember...these were the settings we ended up with (although they're not the most aggressive, he was looking for the highest FSB obtainable). He's running the FSB at 171 stable with Crucial RAM...last I heard.;)