PDA

View Full Version : Help on overclocking the AMD!!


Smiley
09-24-01, 04:13 PM
I have it overclocked. One program shows 1.5 Gig and Cpuid says its 1466MHz. Whic one is it? The multiplier is 11X133FSB. The mainboard is iwill kk266 plus R. I tried to go higher with the multiplier to 11.5 but it freezes on startup. I want it to be 1.6 Gig. How do i do it on this mainboard? Some specs in my sig.

Thanx

PanteraGSTK
09-24-01, 06:39 PM
well since you are using 11*133 it is at 1466. What are your temps and voltages?

Smiley
09-24-01, 06:47 PM
The voltage is set as auto and my temps are 41 idle and 47 load. What are the settings for 1.6Gig? Voltage,Multiplier and FSB?

alkaline
09-24-01, 07:17 PM
Im not sure you will be able to get it up to 1.6 gig if u are already at 41 degrees idle, what kind of cooling are you using?

anyways, for 1.6 ghz, there are a few combinations u could use to reach 1.6ghz,

12x multiplier x 133 FSB =1600mhz
11x multiplier x 145 FSB =1600mhz
10x multiplier x 160 FSB =1600mhz

The 160 FSB would be the hardest to obtain, but would give u the best performance, your voltage need to obtain these speeds really depends on your chip, u should try varying the voltage until u get it right.