fordf250
04-09-05, 08:36 PM
I did the Woutertal droop mod on my 875P-T (ISL 6556BCB)
http://www.ocforums.com/showthread.php?t=342409&highlight=droop+mod
and I,m having problems.When i set the vcore at 1.6 in the bios the vcore in windows is 1.48-1.58 so when I turn the 20K pot down the vcore goes to1.6-1.67 then I reboot and turn the vosf pot (200K) down in the bios and the vcore returns to 1.52-1.6 in windows. I repeated this till there was not adjustment in the trim pot and still had 1.52-1.6Vcore,thats 0.08V droop.
Before the mod My droop was only 0.1V. Did I do something wrong or is this as small as droop gets?
The voltage on pin 9 was 0.5V in windows and I checked that I had 5V from the psu line for the 200K trim pot.
http://www.ocforums.com/showthread.php?t=342409&highlight=droop+mod
and I,m having problems.When i set the vcore at 1.6 in the bios the vcore in windows is 1.48-1.58 so when I turn the 20K pot down the vcore goes to1.6-1.67 then I reboot and turn the vosf pot (200K) down in the bios and the vcore returns to 1.52-1.6 in windows. I repeated this till there was not adjustment in the trim pot and still had 1.52-1.6Vcore,thats 0.08V droop.
Before the mod My droop was only 0.1V. Did I do something wrong or is this as small as droop gets?
The voltage on pin 9 was 0.5V in windows and I checked that I had 5V from the psu line for the 200K trim pot.