yes i got my watercooling!!!!

[!-=sky=-!]

yay.........topic says it all

50C full load......reported with MBM5
and aruond 47C idle

it's so quiet!!! cant hear anything other than my case fans and hard drive

it's a few C cooler than my cak38 with delta but it's still worth it

going to add a pelt maybe.......still deciding

[MeJa]

i havent set up my system yet but i turned it on and my Panaflow makes a nasty soud :( ofcourse one of the blades is broken LOL

Here's a picture of my system currently:

[MeJa]

And here's a picture of the mod i did to my Aquastealth Cube Radiator, I used the i dea from Tubokeau's mod but ofcourse it didnt come out as perfect as his :(

I did made it big enough to fit a 120mm fan in there ;)

[Mr.Lansing]

Congrats!!
50C full load......reported with MBM5
and aruond 47C idle ??????????????
are u sure????
that's hotttttt!!!!!

[!-=sky=-!]

grrh.......

this setup has no radiator...

and the thing is that i am running only with 2L of water

i don't have time to buy a water bucket yet
i will buy that tomorrow

*edit*

going to buy a pelt with it too

[Warlord2]

your pelt will fry if you dont have a radiator on there
a bucket full of water may work now but after the pelt there will be too much heat to disperse


I wouldnt be surprised if your temps just gradualy go up either

[train22]

lol, no radiator, hah

If you live close by to a lake I'm sure you could get a super big pump and try that, of course people would do that (like me, lake in backyard) if only condensation wouldn't be a problem.

[Warlord2]

train22

you would have to need A LOT of water wetter to keep the bacteria down:D

[Overclockers]

omg....u're gonna burn your cpu
suggest u to buy a radiator as quickly as possible.

[train22]

Originally posted by Warlord2
train22

you would have to need A LOT of water wetter to keep the bacteria down:D

not really because I wouldn't just stupidly feed the it the lake water, lol, I'd put my resovier in the water to serve as a cooler to the water but it's not using any water other than the sealed safe water inside my res.

That would be funny though, thanx for the laugh...
"Ughh, good golly, there's a fish on my motherboard!"

[fuzzba11]

Woah, I made the exact same transition, last week...CAK38 to water cooling without a radiator...you NEED to get a big bucket. Currently I'm running out of a small trash can :p But today I'm going to buy an ice box and parts for a bong cooler, hopefully. You should get a thermometer for your water tank, and monitor your temps so they don't go much over 25C. My temps are shown in my sig, what water block are you using?

[Crazy Jayhawk]

Get yourself a radiator right away! You'll need it if you're using a peltier!

[!-=sky=-!]

i am only running with 2L of water in an alluminium pot......

the only thing can find in my house

the temps never go over 53C on full load

but the water is like around 45C

i cant find any radiator avaliable near me...and i cant order on the internet! so i will have to stick with that

the peltier i was talking about(i thought it was one) is actually like a cold thingy....that allows me to attach it on my waterblock

i am using this kit

http://www.ewecool.com/slxt_page.htm

and the so called peltier is this one

http://www.ewecool.com/new_page_21.htm

[!-=sky=-!]

ok forget it i cant stand throwing ice into the thing every few hours
it's starting to **** me off
i will get someone to help me order from the internet

what is the cheapest radiator avaliable?

[Overclockers]

go to junkyard and find car's oil cooler. it's cheap and works great:cool:

[!-=sky=-!]

Originally posted by Overclockers
go to junkyard and find car's oil cooler. it's cheap and works great:cool:

there are no junkyards around where i live......

[Overclockers]

ok ok.....u may be need to bulid your own bong cooler. go to www.overclockers.com/articles389/

[!-=sky=-!]

that kinda setup needs a radiator.........

and my peltier i have NO IDEA how many walts it is
is there anyway to test that?

anyways, the temps dropped 2C.......i am using around 18L of water with nothing else added

[Sonny]

Originally posted by !-=sky=-!


there are no junkyards around where i live......

Are you sure:D? You can try this. There is a car shop in Mong Kok that caters to people that modify their cars heavily & I'm sure that they would have a whole lot of stuff that they throw away when someone blows up there car & you just might find a oil cooler or you can also ask around for motorcycle radiators. The name of the shop is Top Racing. If I remember right from take the MTR at Tsim Sha Tsui then get off at Yau Ma Tei then walk towards Mong Kok turn right in Dundas St. & the shop should be on your left after a few blocks.

[.. AE 86 ..]

are you from hong kong

[Warlord2]

I bong cooler would work on your setup and all you need is some house hold items and a somewhat strong pump

[Sonny]

Originally posted by .. AE 86 ..
are you from hong kong

Nope but have been visiting your country often & kinda familiar with the area. Car parts are cheaper there compared to were I live even with the cost of staying at the Penn. That is when I have to buy specialty parts for some customers who want nothing but the best for their babies(cars).

[!-=sky=-!]

Originally posted by sonny


Nope but have been visiting your country often & kinda familiar with the area. Car parts are cheaper there compared to were I live even with the cost of staying at the Penn. That is when I have to buy specialty parts for some customers who want nothing but the best for their babies(cars).

but at top racing the stuff is like very expensive as they are new and designed for modified cars...

[.. AE 86 ..]

send me or sky a email when u will visit hong kong again

ae86@hotmail.com - me

skyline_gtr2000@hotmail.com - sky

[Sonny]

I'm thinking about the last week of October if I can earn enough cash. It's been a little difficult the past couple of months but hopefully things are looking up & I do want a vacation. You guys old enough to drink?

[William]

the bong cooler does not require a radiator. A fan and some copper tubing coiled will work as a radiator. You need something other than a bucket. If you get a rad, i guarentee your cpu temps drop a good bit. But yes, you will fry your cpu if you put pelt on it without a rad.

[!-=sky=-!]

Originally posted by William
the bong cooler does not require a radiator. A fan and some copper tubing coiled will work as a radiator. You need something other than a bucket. If you get a rad, i guarentee your cpu temps drop a good bit. But yes, you will fry your cpu if you put pelt on it without a rad.

i almost fried my cpu.got the burning smell but luckily i turned my comp off fast enough....it still works and the pelt wasnt enough for my cpu anyways...copper tubing, can i make that myself?


Originally posted by sonny
I'm thinking about the last week of October if I can earn enough cash. It's been a little difficult the past couple of months but hopefully things are looking up & I do want a vacation. You guys old enough to drink?

not really, but we still can, hahaha

[.. AE 86 ..]

me and sky are not old enough to drink
but we do drink on a regular basis
LOL

[Quizno]

old enough to drink? doesnt that depend on where you are? some places, 13 is old enough to drink.......when you think internationally it kinda makes the legal part irrelevant.

im old enough to drink here(canada), but not a 1 hour drive away in the states:)

i dunno why i posted this.....the drinkin thing(of all things) sparked my brain thingy into thinkin:)

[Sonny]

LOL!!! You guys will get me into trouble for a serving few bottles of scotch to you kids:D :D. Let's hope I can close a few deals so I can have a nice vacation. Now I do hope you guys know a few females who love to party there:cool:

[.. AE 86 ..]

i don't think they *party* when they enjoy the night :D
they have it one on one i suppose
well.. thatz the tradition of hong kong...
hahah :p

[Sonny]

Originally posted by .. AE 86 ..
i don't think they *party* when they enjoy the night :D
they have it one on one i suppose
well.. thatz the tradition of hong kong...
hahah :p
Party = Havin' loads of fun:D :D :D