PDA

View Full Version : Is this a good overclock for a 1.33 ??

Geobronc
09-29-01, 02:08 PM
This is as much as I can get out of my 1.33. How does it compare to others?
Geobronc
09-29-01, 02:09 PM
Here is the CPU MM in SiSoft Sandra...
Geobronc
09-29-01, 02:12 PM
Whoops... Here is the CPU clock...
mEKbOY
09-29-01, 04:04 PM
Any overclock is a success. a 200mhz is great.. keep up the good work.:cool:
JAWS
09-29-01, 04:29 PM
Nice Overclock and Setup!:p
App
09-30-01, 07:00 AM
Good Overclock!!

Mine is running stable at 1578 mhz. I had it up to 1620, seemed to run stable but at hot restart it would not start up.
WillysNut
09-30-01, 07:31 AM
Using a CAK38 and 1.85v, I can run 1.55 on cool nights but I really think I need to get a better PSU. I usually run 1500 or 1400..waitin' for bonus time!!
[H]ard|On
09-30-01, 07:36 AM
Hey Willy, I use a CAK38 and my temp is at 55 Idle and 60+ Load, What's wrong?? I have a 1.4GHz Athlon BTW
WillysNut
10-01-01, 06:46 PM
Originally posted by [H]ard|On
Hey Willy, I use a CAK38 and my temp is at 55 Idle and 60+ Load, What's wrong?? I have a 1.4GHz Athlon BTW

Could be a few things. 1.4Gig Athlons are hot!!..just like most 1.0 and higher AMD cpus :). Have you removed the fan from the CAK and cleaned out the fins w/ compressed air or the like? You'd be suprised how much crud can collect at the top of the sink and divert air-flow.

How about your case cooling? Copper HSF's require real good ventilation for both fresh cooling air and exahust from the HSF base. I also took the finger-protector off the Delta (BTW I did accidently stick my finger in it..nothing bad happened)

Try making a shroud for your CAK...after you clean it (if you need to). Please excuse the Netgear addy! :) See attached...I bet you'll see a 1-3c decrease in temps. I did! Good luck!
Mr.Lansing
10-01-01, 10:16 PM
Geobronc,
Nice overclock!:)
Sonny
10-02-01, 02:21 AM
Nice O/C:D :D :D. Can you up the FSB 1MHz at a time?
demon-eater
10-02-01, 08:21 AM
hey willy i like that addon on ur heatsink.. i think ill do that same thing to my sk6 when i get it later on this week and i think ill try it on my radio shack heatsink fan that ihave right now that keeps my 1.0 athlon oc to 1.2 under 50C full load of course im force feeding it air by a 80mm fan and my room is kinda cool :-)
Geobronc
10-02-01, 10:38 AM
I may have to try to increase the Front Bus by increments of 1mhz.
Also may try and create ashroud like Willey did. That may help the temps a little more.

Thanks all!
TranceBear
10-02-01, 10:50 AM
That's a good one
i12bina3
10-02-01, 11:01 AM
jep nice OC 200mhz is always nice :D