Mushkin Promo on DFI NF3 can't boot 'ONLY' after clear CMOS
Mushkin Promo 512MB (BH-5) on DFI NF3 250GB allways can't post\boot after clearing CMOS with jamper !!! Without cord power cable , without battary for long time nothing not helps -- my system not boot with this RAM modules .
I am reaplacing Mushkin with other module (Kingston 256MB^C3) my system is boot to BIOS without any problem , i'm must to load default/optimazed settings . After restart the system and replacing the memory modules ... i have the 24/7 stability system on PRIME95 , MemTest86 ... with Mushkin memory .
System for test only stock aircooling :
-NewCastle CG x10 @ 2300MHz
-Mushkin Promo DDR400 SPD 2-2-2-6 (BH-5) @ DDR460 2.0-2-2-10 (3.1v)
-Sapphire R350 128MB 256bit @ ?
-ENERMAX EG651P-VE 550W @ ?
After couple days of running stress test without any problem ... i'm want to get more and more ... and my system can't start after Clear CMOS .
The same DFI NF3 don't have this trouble .
The MB and CPU i'm buy before couple days .
Memory modules from some friend .
What is the trouble with this Mushkin memory ? Mayby CPU (not tested) ?
P.S. Sorry for my English ... I'm so nervous , first bugs ...
Mushkin Promo 512MB (BH-5) on DFI NF3 250GB allways can't post\boot after clearing CMOS with jamper !!! Without cord power cable , without battary for long time nothing not helps -- my system not boot with this RAM modules .
I am reaplacing Mushkin with other module (Kingston 256MB^C3) my system is boot to BIOS without any problem , i'm must to load default/optimazed settings . After restart the system and replacing the memory modules ... i have the 24/7 stability system on PRIME95 , MemTest86 ... with Mushkin memory .
System for test only stock aircooling :
-NewCastle CG x10 @ 2300MHz
-Mushkin Promo DDR400 SPD 2-2-2-6 (BH-5) @ DDR460 2.0-2-2-10 (3.1v)
-Sapphire R350 128MB 256bit @ ?
-ENERMAX EG651P-VE 550W @ ?
After couple days of running stress test without any problem ... i'm want to get more and more ... and my system can't start after Clear CMOS .
The same DFI NF3 don't have this trouble .
The MB and CPU i'm buy before couple days .
Memory modules from some friend .
What is the trouble with this Mushkin memory ? Mayby CPU (not tested) ?
P.S. Sorry for my English ... I'm so nervous , first bugs ...
Last edited: