Strange NF7-S / TCCD compatibility issue?
Hi guys
I’ve been trolling this forum for a while now but this is the first time I have had a problem I haven’t been able to solve simply by reading other posts.
I recently bought 1Gb Corsair XMS3200XL Pro for my gaming rig, which I have no doubt you know ships with the Sammy TCCD chips but for some unfathomable reason refuses to work with my NF7-S v2.X. It’s not the board as far as I can tell as any non-TCCD chip ram runs at the PRO [email protected] (using OCZ PC3500 to test) speeds without issue. Memtest shows no errors what so ever which is confusing the hell out of me.
Mystery deepens in that I have another NF7-S which is a revision 2.1-2 (black dimm sockets, plastic arm and a 2.X,1.0 marker in CPZ on which the ram runs like a golden dream. Turns out the NF7-S v2.X might be a highbred as it has the metal arm and violet ram sockets but green PATA ports?
Has there been previous instances of TCCD chips not working with the bodge job boards ABIT been producing the last year?
Prime is fine using the Small FFT and Large FFT but fails miserably at the bled test, truth be told it doesn’t even initialise as cpu load hovers about 3%. From what I have read this is pointing at the ram rather then the motherboard as the cause of the problem (or the boards incompatibility with said ram)
Board is over-volting and I watch that temps never get over 45@load so the more common reasons can’t be the reason.
I’m at the end of my rope I don’t know what else to try… any ideas?
p.s. Spec in sig
Hi guys
I’ve been trolling this forum for a while now but this is the first time I have had a problem I haven’t been able to solve simply by reading other posts.
I recently bought 1Gb Corsair XMS3200XL Pro for my gaming rig, which I have no doubt you know ships with the Sammy TCCD chips but for some unfathomable reason refuses to work with my NF7-S v2.X. It’s not the board as far as I can tell as any non-TCCD chip ram runs at the PRO [email protected] (using OCZ PC3500 to test) speeds without issue. Memtest shows no errors what so ever which is confusing the hell out of me.
Mystery deepens in that I have another NF7-S which is a revision 2.1-2 (black dimm sockets, plastic arm and a 2.X,1.0 marker in CPZ on which the ram runs like a golden dream. Turns out the NF7-S v2.X might be a highbred as it has the metal arm and violet ram sockets but green PATA ports?
Has there been previous instances of TCCD chips not working with the bodge job boards ABIT been producing the last year?
Prime is fine using the Small FFT and Large FFT but fails miserably at the bled test, truth be told it doesn’t even initialise as cpu load hovers about 3%. From what I have read this is pointing at the ram rather then the motherboard as the cause of the problem (or the boards incompatibility with said ram)
Board is over-volting and I watch that temps never get over 45@load so the more common reasons can’t be the reason.
I’m at the end of my rope I don’t know what else to try… any ideas?
p.s. Spec in sig
Last edited: