PDA

View Full Version : Athlon CPU unlocking multiplier with conductive pen


nekrozon
10-01-01, 10:07 PM
I heard the only way to unlock the multiplier of a socket A Athlon cpu i by using a conductive pen to connect the pairs of L1 trace routes. IS this true?
-nekrozon

Hugo 59
10-01-01, 10:39 PM
It is probably one of the best ways but you can also use a pencil or a defogger repair kit.

bigfoot
10-02-01, 01:03 AM
Yes it's true, your not dreaming, it's working like a charm for me, i just recently used a .5mm mecanical pencil as my tool, and i had a 1Ghz T-bird wunnich rock solid at 1.1Ghz

jbell
10-02-01, 03:21 AM
I tried the conductive pen and it was a huge mistake!!!! The 99cent #2 pencil has worked flawlessly for me - it is easier to separate amoung the bridges and is less permanent and has held up better for me!!!

Luie
10-02-01, 03:57 AM
So using a pencil or a conductive pen is better at doing the job?

ps. Most of the people I know use pencil. Conductive pens a not easily available.

-=UR=- Ranger
10-02-01, 10:27 AM
Both work, but conductive pen is more permanent, especially when you are removing your HS often..

Hugo 59
10-03-01, 01:42 AM
The way I did was pretty easy just put something in-between the bridges when you do it. I used my blockbuster video card worked swell.

thefly
10-03-01, 11:54 AM
I used the famous scotch tape-rear defogger kit method.

Masking out 3 of the L1 bridges with scotch tape then adding a small blob of defogger kit to the unmasked bridge.

Let it dry and then continue with the others.


Works well. :)

Sonny
10-03-01, 06:29 PM
I used a conductive ink pen. I never had the pencil trick work for me & the L1 Bridges being as important as they are I wouldn't trust pencil lead for it. Certain MoBos want a strong & clean signal thru the bridges that a pencil will not be able to deliver. The pens are also not available in my area so I had to special order them.

krakerman
10-03-01, 09:46 PM
Ive always used pencil lead for unlocking. then again, ive had it wear off a few times which kinda sucks when you wanna fool around with speed and it wont work. thought my comp was dying once from that hehe.

el
10-03-01, 10:47 PM
conductive pen is the best cuz you can always remove it adn it is on there unless you want to remove it. the defogger is on there for life and pencil trick last long but not forever especially if you take the hsf off every couple of days. try a toothpick with teh conductive pen takes 30seconds if you don't get nervous. :)