My specs are in sig. Purchased the Mushkin blues from outpost. Tried running on optimized settings and this ram just doesn't like 2-3-3-10. It will boot at 2-2-2-8 when it won't with 2-3-3-10. First time burning in ram, and read alot of the stuff around. Sort of fond of Uwackme's method cause the name rulz... anyway.
I am running at 2-2-8-2 with CPC on and getting errors in the thousands at just 220 FSB. This is with vdim at 3.3. Run it down to 215 and get none. This just seems way to low to me........ I am assuming it's necessary to run the mem divider 1:1 otherwise the burn in would be pointless? Should I just go at 216 or 217 as a starting point and go from there? Also, what is the best way to get these heatspreaders off? I know it voids warranty but they have to go.
Settings as of now:
FSB: 215
LDT/FSB: 4
CPU startup v: 1.425
CPU v: 1.475 110%
LDT v: 1.4
Chipset: 1.8v and DRAM at 3.3v
CPC on
Tcl 2
Trcd 2
Tras 8
Trp 2
Trc 7
Trfc 15
Trrd 5
Twr 2
Twtr 1
Trwt 2
Tref 3120
Twcl Auto?
I am running at 2-2-8-2 with CPC on and getting errors in the thousands at just 220 FSB. This is with vdim at 3.3. Run it down to 215 and get none. This just seems way to low to me........ I am assuming it's necessary to run the mem divider 1:1 otherwise the burn in would be pointless? Should I just go at 216 or 217 as a starting point and go from there? Also, what is the best way to get these heatspreaders off? I know it voids warranty but they have to go.
Settings as of now:
FSB: 215
LDT/FSB: 4
CPU startup v: 1.425
CPU v: 1.475 110%
LDT v: 1.4
Chipset: 1.8v and DRAM at 3.3v
CPC on
Tcl 2
Trcd 2
Tras 8
Trp 2
Trc 7
Trfc 15
Trrd 5
Twr 2
Twtr 1
Trwt 2
Tref 3120
Twcl Auto?