Must break 7000.

[{PMS}fishy]

http://pmsfishy.zerobrains.com/6913.JPG

Must break 7000.

R300 Radeon 9500np.

[Gautam]

AGP speed bump?

[{PMS}fishy]

AGP speed bump?

Worth a try. Not like I need many points.

[{PMS}fishy]

Something is screwed up. Setting are all unchanged and now Im getting BSODs. Oh I so hate this CPU.

[speed bump]

I would try mounting a fan over your ram. It was worth 10-15mhz even with ramsinks when I tried it. Also when Oppainter was benching his 6800s on water he put the radiator in a bucket of ice water and it was worth about 20 or more MHZ.

How far did you bump up the AGP? I got some nasty BSODs with my 9500 anywhere past 68mhz or 69mhz AGP freq.

Also which Softmod and drivers are you using.

[{PMS}fishy]

Yeah, I can't run anything other than 66mhz with this card.

Did that run on the 4.12s

Doesn't matter whats cooling this card. On air I max at 427, on water 427, on an 80w TEC 427.

Im going to go and borrow a 172w TEC, cause I have run the card at 460 core with that. Otherwise, I think Ill need to slap somehting heavy duty on it.

[speed bump]

What about volt mods? I know my card only did allitle better with better cooling becuase it needs more voltage.

Also when I get home i'll pull up the ram timing tweaks that I have found worked with atleast the Hynix ram on my 9500.

Finally hopefully i'll have both my DI tubes done by the end of the month if your still hunting I might let you borrow the GPU tube so you can hopefully hit somewhere around 480 core.

[{PMS}fishy]

What about volt mods? I know my card only did allitle better with better cooling becuase it needs more voltage.

Also when I get home i'll pull up the ram timing tweaks that I have found worked with atleast the Hynix ram on my 9500.

Finally hopefully i'll have both my DI tubes done by the end of the month if your still hunting I might let you borrow the GPU tube so you can hopefully hit somewhere around 480 core.

Wow, that would be sweet man, thanks.

Card has VTT vDIMM and vGPU mods already done :D

My card has Infieon RAM on it, so Im not sure if the tweaks will be the same. I don't want to kill this card, shes smoking fast.

Also, which BIOS can I flash to the card so that I don't have to deal with all the softmod drivers?

[speed bump]

I'm not sure right off. I haven't had time to look for it recently. However its the one El(')maxi used for his 9500 so you might PM him for exactly which bios it is.

However if you go here (http://www.techpowerup.com/bios/) you can mod the clock speeds for your bios.

Good luck