i just got my new watercool kit !!

[.. AE 86 ..]

me and jensen had just ordered a new custom watercool kit from www.dangerden.com . here's what we ordered

radiator - the cooling cube
pump - eheim 1048
waterblock - maze two for amd
waterwetter

does anybody know what my temps will be when i have around 25c room temperature and 5L of water
thanks

[Flow]

Hey, congratulations!

How long did it take to get your order from DD?
I have ordered a Maze 2 myself last week from them, and I wonder how long I will have to wait....

Have fun!!

[Baboo]

It sounds very similar to my setup, except my senfu rad could be a little more efficent, but you do have the pump model up from mine (which has a higher flowrate).
Dispite the pump giving a higher flowrate, I borrowed a 1048 and installed it in my system and found no temp difference to the 1046. The 1048 is a little noiser.

Anyway, my PIII 850@1130 runs at 35c under full load with a room temp of 25c.
Generally, AMD's run approx 10c hotter.

[Sonny]

Your 2nd set right? Hopefully this works out better than the last one:D

[!-=sky=-!]

Originally posted by sonny
Your 2nd set right? Hopefully this works out better than the last one:D


hehe
yes
the last set only costed 250$ HKD plus the cost of my water bucket
around 35$ USD?
hahaha, oh well

[Mad_Capr]

DangerDen is sorta slow on shipping. I'm not sure whether this is due to low staff or high demand for their products.

Either way, it is worth the wait because of the high quality. I haven't tried their radiators yet, but the maze2 waterblock is excellent.

FYI, I use a BE Cooling 6.25" x 5" radiator. They ship extremely fast. The radiator quality seems good, nothing spectacular.

[Warlord2]

dd shipped to me in about 4 working days with ups ground

a maze2 and a dd cube


but water cooling is becoming more in demand sense I got mine though

[Sonny]

Originally posted by !-=sky=-!



hehe
yes
the last set only costed 250$ HKD plus the cost of my water bucket
around 35$ USD?
hahaha, oh well
Thinking about watercooling myself. I get a little worried when I run 1.434GHz 10 X 143 @ 1.95V(MAX). It's stable but really HOT, around 53°C. Oh well maybe it's time replace my trusty DOrb3:D. Still waiting for my swifty......................i forgot:p i didnt order one just yet:D :D :D

[!-=sky=-!]

Originally posted by sonny

Thinking about watercooling myself. I get a little worried when I run 1.434GHz 10 X 143 @ 1.95V(MAX). It's stable but really HOT, around 53°C. Oh well maybe it's time replace my trusty DOrb3:D. Still waiting for my swifty......................i forgot:p i didnt order one just yet:D :D :D

it's not that bad....my watercooling is getting me hotter temps than my cak38....grrrhhhhh

have to wait until i get my new watercool kit!!

[Sonny]

I guess I just want more 'cause when I find that voltmod for my MoBo & get my new PSU, Enermax with a 5V mod, I will be looking to O/C more.

[!-=sky=-!]

i have been looking at the 5v mod for a while but i don't quite understand it

i am running 4.78v on the 5v line and it can get as low as 4.7v when on full load

[Sonny]

Well I can't say I understand it enough but adding a pot(potentiometer) would either increase or decrease on demand the resistance there by fooling the PSU to give up more voltage & hopefully more amps. The funny thing is my crappy, single fan, no name 300W PSU shows up with 5.28V but it quickly drops to 5.05V when I load her up & when I do run at 1.434GHz I need my VCore at MAX 1.95V then the 5V starts to go down to 5.03V on idle. To me this sounds like my stumbling block for now. Oh yeah, my temps too & my video card is a bottle neck, I want PC150s.........or maybe just give up & do the DDR thing.............

Why can't enermax just build a PSU with an adjustable 5V pot?

[.. AE 86 ..]

my lowest is 4.78v for my 5v... i am running a t 4.84v