The "Z" Stepping

[Luie]

I've got a Duron and got a strange stepping.

AMD Duron
D750AUT1B
AKCA0047BPMW
Z8127151212

Anyone know how well it can oc? What is it's maxium temperature? Notice it's "Z" not "Y". I've seen "Y" can oc a 750 to 1000 with no problem. Dunno "Z" though...

[!-=sky=-!]

the stepping is the second line of code, or third line from your data

akca's are great overclockers

my duron 750 did 1000 before i cracked it and broke

make sure you have good cooling when you overclock.......

[anarki_gr]

i had exactly the same duron and got it up to 1011 MHz @ 1.85 volts. it's a good overclocker and if you do a voltage mod and have really good cooling (watercooling+peltier) you'll get even higher than that.
good luck!

[The Coolest]

Try and see... But remember of good cooling comes first.
Let us know what u can get out of it.
Good luck!

[!!tio!!]

Freezing Cooling system + High Vcore (>2Vcore)
That will brings you to high speed

ummm after reading a stepping guide I know something about your stepping.... Is a good overclocking stepping and I think you can oc your thing from 1000 to 1100 maximum.... If you are lucky, you may go up to 1200! Wish you good luck

[!!tio!!]

Just see this in OC home... CPU database

1343
2.32 V
AKCA
A7V133 VOLT MOD
FSB158 *8.5

with Duron750

[!-=sky=-!]

Originally posted by *Tio Etomac*
Just see this in OC home... CPU database

1343
2.32 V
AKCA
A7V133 VOLT MOD
FSB158 *8.5

with Duron750

i don't believe this.....even with vmod and extreme cooling the durons max out at 1100/1200

and durons cant take 158fsb anyways

[!!tio!!]

I don't know.... thats not me anywayz........

[Slaught]

Hey, i got a duron 800 mhz with v. similar code

D800AUT1B
AKCA 0045WPCW
Z7798140484

should i expect similar results, or will it go a bit higher as its an 800?

[Random Nonsense]

my bro has an AKCA "z" had it at 1ghz with 1.6 volts! it was stable as far as i could tell, he says it crashes too much, even though i didnt see it..... i gonna push voltage up a bit. that needs fiddling with the bridges or not?

[el]

well the 1.2 is kinda hard to believe but if you can post it at 8.5x133 then pushing up to 158 is possible. a couple of guys with 600's got to 1.2 with high fsb so it is possible but I bet it wasn't air cooling.

[The Overclocker]

cool, i hope i get a good steping, i hate online ordering

[Tobes]

Originally posted by Slaught
Hey, i got a duron 800 mhz with v. similar code

D800AUT1B
AKCA 0045WPCW
Z7798140484

should i expect similar results, or will it go a bit higher as its an 800?


My previous processor was a Duron 800:

D800AUT1B
AKCA0106PEW
Z8484540436

I had it at 1015Mhz (7x145) stable. 1036 was about as high as it would go. This was with a thermaltake Volcano II HSF and 1.75V.
Rest of the setup was as below.

[Luis]

Three weeks ago i got this chip:

D700AUT1B
AKCA0110FPCW
Z8680160385

Right now it´s running at 980 (7x140), rock stable with 1.95V, but it could do Sandra loops at 1036 and even booted at 1050 (2.05V). I think the old hdd and vid card that I keep from my previous machine are holding me back, so I can´t push the FSB higher...

[eobard]

D800AUT1B
AKCA0107XPNW
Z8720940253

Rock solid @ 1053mhz (117*9.0) with 1.85v for a couple of months. Crashes like crazy @ 1070mhz. Soon I'll try for 1200-1300 with the overvolt mod on my motherboard.