My memory is sh_t and in dual channel it wont really go past 220 without erroring out. Now in single channel it will do over 260+ for some strange reason.
So my question is should i run dual channel and keep my divider at 133 and my timings at 2.5-3-3-5 1T or...
Go single channel and go for 1 to 1 ratio and my htt will be at 260 (260x10) but i will lose my timings. They will prob be 3-4-4-7.
Memory is pc4000 crapola kingston. Right now i run 10x260 with max mem clock at 166 so memory is at like 217. 2600mhz winchester.
So my question is should i run dual channel and keep my divider at 133 and my timings at 2.5-3-3-5 1T or...
Go single channel and go for 1 to 1 ratio and my htt will be at 260 (260x10) but i will lose my timings. They will prob be 3-4-4-7.
Memory is pc4000 crapola kingston. Right now i run 10x260 with max mem clock at 166 so memory is at like 217. 2600mhz winchester.