OC Venice independently from RAM...?

I have read a lot of how-tos and what not, but I am still confused about something.
If I run a Venice on a DFI NF4 / water with some PC3200 ram...will I be able to clock the venice up to 2.6-2.7 with the HTT and leave the ram at 200Mhz?

Thing is I want to run 2x 1GB sticks and they just dont OC very well.
Im using the PC for CAD and Image manipulation.

Thanks for your help guys...

SenC.

Yea, it's called a divider. You run the ram on a divider so your ram doesn't OC but your HTT goes up.

when you enter the Genie Bios it is the first (or second) thing you see should be set to auto by default which you can change to 200, 180, 166, etc (those are the dividers) 200=1:1, 180 = 9/10, 166 = 5/6 (and so on). Set those and you can keep ocing your cpu further. Btw if you go all the way down in the menu were you set the fsb there is a mem test option enable that and see how far you can push your 2x1gig maybe you have some headroom.