hi, i want your idea about my current temp.
you can get my system set up at my sign.
Now i use XP90 and Room temp is about31-32c (i not OC)
The CPU temp down from 73(load and throttle started) to 59-61c fter change from stock HSF and some case fan modification according to the advice from the forum.
Now
Idle: sys 33-34c(2c different from room temp), CPU: 46c, PWM: 39c
Load(2 prime95): sys:34-35c, CPU:59-61, PWM:50-51c
Note: because my country is very hot-> my room temp is high. If i put my system in AC room with temp about 24c-> Load: sys-27c, CPu-55c , PWM-46c
I heard that ABIT read higher temp than other coz it use diffrent approach to read the temp.
Question:
So if i want to compare my temp with someone who use ASU board with the same CPU , do i have to add at least 10c to ASUS temp for comparing CPU temp?
How about PWM temp, is PWM temp of ABIT also different from ASUS?
About OC, I tried to OC to 230FSB(3.0E->3.45) to test my board and CPU with stock voltage and 1:1 divider, 2.8 RamVolt and AGP volt1.65. (RAM 3-8-4-4) and GAT setting (ANADD).
with OC, in full load all CPU and PWM temp increase 3C except SYS temp.
so is 3.0->3.45 at 64C secure? I am not really want to OC as am afraid that it will shortage my CPU life because i plan to use this system at least in next 4-5 years. However my friend siad that it is useless that i bought ABIT and not OC, if in that case i should buy intel board instead which is very stable.
So is OC will shorten CPU life very much, how about next 4-5 years will my cpu able to stand if I OC or it will become slow and slow?
Soory for long post as i just to give more info so all of u can give comment easily
you can get my system set up at my sign.
Now i use XP90 and Room temp is about31-32c (i not OC)
The CPU temp down from 73(load and throttle started) to 59-61c fter change from stock HSF and some case fan modification according to the advice from the forum.
Now
Idle: sys 33-34c(2c different from room temp), CPU: 46c, PWM: 39c
Load(2 prime95): sys:34-35c, CPU:59-61, PWM:50-51c
Note: because my country is very hot-> my room temp is high. If i put my system in AC room with temp about 24c-> Load: sys-27c, CPu-55c , PWM-46c
I heard that ABIT read higher temp than other coz it use diffrent approach to read the temp.
Question:
So if i want to compare my temp with someone who use ASU board with the same CPU , do i have to add at least 10c to ASUS temp for comparing CPU temp?
How about PWM temp, is PWM temp of ABIT also different from ASUS?
About OC, I tried to OC to 230FSB(3.0E->3.45) to test my board and CPU with stock voltage and 1:1 divider, 2.8 RamVolt and AGP volt1.65. (RAM 3-8-4-4) and GAT setting (ANADD).
with OC, in full load all CPU and PWM temp increase 3C except SYS temp.
so is 3.0->3.45 at 64C secure? I am not really want to OC as am afraid that it will shortage my CPU life because i plan to use this system at least in next 4-5 years. However my friend siad that it is useless that i bought ABIT and not OC, if in that case i should buy intel board instead which is very stable.
So is OC will shorten CPU life very much, how about next 4-5 years will my cpu able to stand if I OC or it will become slow and slow?
Soory for long post as i just to give more info so all of u can give comment easily