what do you think about this??

[heavenly4you2]

hey guy's , I have bought a Danger Den watercooling setup and need the wisdom that's in this forum!!. I bought a Danger Dan Emaze2 waterblock , The Cube radiator , and a Eheim 1200ltr hr pump. The guy at the local (and the only one in the Netherlands) say's that it will cool my Tbird 1.4@1612mhz when i use it without a resevoir (inline). What are yout thoughts about this??
Thanks

[Oni]

I'd use the radiator. No point in taking a senseless risk. It may keep your Thunderbird cooler, but it'll about equal air cooling w/o the radiator.

And I think your pump is a little too fast. 1200 Litres per hour is a little fast. It dosn't give the water adequate time to pass through the radiator and deliver its heat to the fins. Slow the pump down a little bit and you'll get better results.

[heavenly4you2]

hi Oni , i mean does the Radiator alone cools adequate or should i use the pump as a submersible and also use the radiator?
The pump is mentioned in a couple reviews as adequate for the Emaze2? , maybe it adapt itself to the resistent it encounters and thus slow the water , The Emaze2 is also supposed to slowdown the flow somuch that a lighter pump would be not enough?. I'll try a smaller and see what happens , i use to keep a aquarium so i have some pump's to my disposel. Thanks for your reply !!.

[chuckchippie]

Originally posted by Oni
I'd use the radiator. No point in taking a senseless risk. It may keep your Thunderbird cooler, but it'll about equal air cooling w/o the radiator.

And I think your pump is a little too fast. 1200 Litres per hour is a little fast. It dosn't give the water adequate time to pass through the radiator and deliver its heat to the fins. Slow the pump down a little bit and you'll get better results.

that isn't true...it has less time ni the rad to cool, but also less time in the block to heat...balances out