Shrouds For Bonneville Cores?

[3DFlyer]

...

[goodolarchie]

weapon makes nice shrouds for em... classifieds. I know DD has what I think is the non-ac 302 core shrouds for $15. You're looking for a 1977 Pontiac Bonneville. Good luck.

[sunrunner20]

I've got a 3.0E (CO :bang head ) and a 6800U both will be watercooled off a 2-302 heatercore, shrowded of course, and two 120mm 100cfm fans (undervolted) I KNOW its more than enough for my CPU, but I might have to turn the fans up a bit when I add my 6800U, or sacrafice temps. It will all depend on exactly how well my 3.0E overclocks.

Oh, and the 2-302 is a standard heatercore. Comes from a 1977 bonniville with AC. Should cost about $17.99. Check out Weapon's thread in the stickies about moding the heatercore. Has helpfull hints about picking out the right one.

[JTanczos]

Weapon makes a great shroud for both cores I beleive. Check out the classifieds for those. I think the DD ones are acrylic and not all that thick.

JT

[n64man120]

A sheet of aluminum and a hammer worked well for me, made a great shroud for a 77 Bonne :)

[Bugsmasher]

Going with the 'bigger is better' approach ya could take a look at one of these beasts....

Quad Core (http://www.voyeurmods.com/index.php?action=item&id=990&prevaction=category&previd=featured&prevstart=)

At $99 with a low profile shroud it beats most triples IF you have the space for one. Downside is that without knowing what the model number is for the HC there isnt much of a way to find out how many passes (how restrictive) it may be.

[JasonDTM]

Weapon may know because his monstercore is almost the same core, and you can get a trick shroud from him. :)

[Quest For Speed]

A sheet of aluminum and a hammer worked well for me, made a great shroud for a 77 Bonne :)

That is what I did. :) I picked up the Bonny core from autozone for $18 and used some sheetmetal I had laying around for the shroud.

[n64man120]

:x Autozone charged me like $24 I think