PDA

View Full Version : Dlouly76's First WC PC

dlouly76
08-22-05, 11:43 PM
Ok Finally DONE!! YAY.. Here are some photos: :)

I want to Thank those who helped me with my questions! You know who you are guys.

Here are some photos - I am still missing some screws for the 4th fan on the rad.
At stock speed @3.4
Idle: 32c
Load: 37c
dlouly76
08-22-05, 11:44 PM
3 more.
dlouly76
08-22-05, 11:45 PM
Forgot to say what the water cooling system is:


Cpu Block - Swiftech Storm
Gpu Block - Danger Den Acetal Maze4
Pump: Swiftech MCP-655
Radiator / Fans - BIX 2 w/ 4 Vantec Stealth 59cfm/28dba fans
Res. - Danger Den Dual Bay Res.
1/2 ID Tygon Tubing and Barbs
:)
voigts
08-23-05, 12:32 AM
Nice job. I like the pump mounting. Mounting the rad on the back makes for quite a bit more bulk out the back of the case, but you will sure like how easy it will be for you to blow the dust out of the rad when you need to.
dlouly76
08-23-05, 12:45 AM
Thanks! I am overclocking the Cpu a bit right now.
Right now I am at 3.91gig (17x230)
Idle 32C
Load 40C

I cant change my multiplier? Its stuck at 17 and I dont have the option to bring it down or change it? ....
lowfat
08-23-05, 01:12 AM
Looks very clean, definately for a first build. Not really a fan of the res, but still very nicely done.
Voodoo Rufus
08-23-05, 01:33 AM
Nice job. Especially for a first timer. :thup:
y2jed_2000
08-23-05, 01:35 AM
looks great, i like how u mounted the rad
Etacovda
08-23-05, 03:14 AM
its an intel, its locked.
MVC
08-23-05, 08:01 AM
Very nice and clean. I would have put the radiator on the top, rather than the back, but it'll bleed a lot easier the way you've got it. How deep is that case now with the radiator on the back, must be close to 30" or so.
CCUABIDExORxDIE
08-23-05, 08:16 AM
I really like the look of that loop. its beautiful, clean, and ohh man do i like W-ATX. great job for a first time, isnt water fun!
dlouly76
08-23-05, 08:25 AM
Thanks guys. I have to go again to home depot to get the screws to mount the 4th fan today. Well now its done I have been overclocking last night and I ran Prime95 for about 6 hours at 17x230 and I think the max cpu heat was 44. Should I stop there or keep pushing it?

I think I am going to replace my stock case fans as well. Kinda loud. I want SILENCE... :-)
dlouly76
08-23-05, 12:36 PM
Very nice and clean. I would have put the radiator on the top, rather than the back, but it'll bleed a lot easier the way you've got it. How deep is that case now with the radiator on the back, must be close to 30" or so.

Thanks
Pretty Deep now as the 1200B is already extended. I dont know how long it is but lets just say - pretty deep. :) - Imagine if I used shrouds.. It would of looked really funny.
Sneaky
08-23-05, 12:52 PM
very nice man, very nice... only thing i dislike is the acrylic bay res, but its nice nonetheless :thup:
dlouly76
08-23-05, 12:56 PM
Yeah I had to repair that Res when I First got it since they did not seal it all the way. Its sealed now and I even had to shave it on the sides with a dremel to fit it in my bay. But all is good. I wanted to conceal it and put the bay face plates on the front but the plates would not fit unless I really shaved the res. I didnt want to do that as I didnt want to risk a leak. This will do for now. I may alter my face plates so I can place them on somehow.