View Full Version : Check out my new water block mount
foxmulder
10-16-01, 08:49 AM
Just got this yesterday. I thought I'd post a pic cuz it looks cool.
After installing it temps dropped about three degrees because of the higher pressure over the standard clip
The Overclocker
10-16-01, 12:33 PM
looks cool, can i have a side veiw as well, i want to copy it (sorry to be so blatent)
foxmulder
10-16-01, 12:58 PM
Here's some pics, I hope they're useful
I't kinda hard to get a pic from the side and I really didn't wnt to take everything apart
foxmulder
10-16-01, 12:59 PM
one more
foxmulder
10-16-01, 01:00 PM
and one more
foxmulder
10-16-01, 01:01 PM
If you do copy it be sure to post a pic
TheMortalWombat
10-16-01, 02:27 PM
Nice ... Looks better than mine anyways. I made mine from a piece of ½" alumimun I had lying around
Speed_Freak
10-16-01, 06:58 PM
nice rig
That look sweet! Very professional!:) Now if I could only do something like that!:confused:
The Overclocker
10-17-01, 10:08 AM
very nice, i will do it soon, probably make it out of lexan instead though. thanks
How thick is that? It looks about 1/2". And what's it made of?
Random Nonsense
10-17-01, 10:32 AM
MAN that looks good :) u could sell that thing im sure! looks way nicer that everyone elses so far!
fuzzba11
10-18-01, 04:38 AM
Yeah, great idea! Kudos for the design :)
Intraveinous
10-18-01, 10:42 PM
Originally posted by foxmulder
Just got this yesterday.
When you say 'got this' do you mean, got it back from the machine shop after you gave them you design, or got it in the mail after I ordered it from XXX.com last week???
Cuz umm... if it's the latter, could you post the link?
Peace
John
foxmulder
10-19-01, 05:20 AM
As much as I really would love to take credit for making this baby myself I didn't. I ordered it from a guy here in Austria who makes watercooling equipment.
Here's the link but I don't know if you can read german or if he will ship internationally.
www.zern.at
Arkamedies
11-27-01, 10:43 AM
I work with ALOT of aluminum all day, of various thicknesses, and I have the tooling and equiptment to make just about anything. If someone seriously needs a special bilt mount like that, give me a shout and we can talk.
Its all good.....:cool:
Looks good. Definately a cool hold down.
Originally posted by foxmulder
As much as I really would love to take credit for making this baby myself I didn't. I ordered it from a guy here in Austria who makes watercooling equipment.
Here's the link but I don't know if you can read german or if he will ship internationally.
www.zern.at That's really nice looking. The guy even used his initial. Really good idea though.:beer:
wolfsid
11-27-01, 06:34 PM
Originally posted by mw521
That's really nice looking. The guy even used his initial. Really good idea though.:beer:
Not bad But Why not just make one of some thick plexglass cheaper and ITS CLEAR easyer to cut and i think it looks cool if U add your own desigen to it ...
hack the planet..
Originally posted by wolfsid
Not bad But Why not just make one of some thick plexglass cheaper and ITS CLEAR easyer to cut and i think it looks cool if U add your own desigen to it ...
hack the planet.. Don't use plexi, use Lexan. Plexi will fracture too easily.
wolfsid
11-27-01, 08:44 PM
Originally posted by mw521
Don't use plexi, use Lexan. Plexi will fracture too easily.
wel li don't know about that in home depot they had three different kinds soft med and hard well i got some med and hard 3/4 thick and the hard didn't bend at all just about but the med was cut smaller and used at a clamp for the mb waterblock i have...
med bent a little thats why i put it on mb chipset.
hack the planet..:beer:
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.