GeForce 2 HSF Removeing

[Tbird man]

Can someone tell me how to remove the HSF on my GeForce 2 and put a new one on (it is epoxied on)
and also what is the best way to applay ASII

[RangerJoe34]

put the card in an anti-static bag, place in the freezer for about 20 minutes
take it out and pull off the HSF, thennn, depending on what kind of heatsink you bought, you can either put AS epoxy on which can be good as long as you dont put it on by itself, mix it 50/50 with regular ASII, you can do that, or you can just put ASII on the bottom because the fan is held on by a clip or screws. but either way, make sure you have ASII on it

you can fold up a piece of paper just make sure the sides are straight, and spread it over the surface

[ve6jhc]

I used this method on a GeForce 2 MX 400 but I had to leave it in the freezer over night to get it to pop off (and pop off it does!!).

[Tbird man]

thanks for the advise i think i am going to make a chipset cooler like the orange orb but out of copper.