Temp of YOUR Amd

[!!tio!!]

Just state your CPU, Vcore, overclocked, temp idle, temp full load, type of cooling and with case or without case

1Ghz
1.76
37C
41-52C
Water cool without radiator!
With case

[oc jason]

1.33@1.53ghz vcore=1.775 42c idle 44c load

Glaciator Cooler, with case closed

[sciss]

1.40 AHYJA-Y @ 1.40 (Waiting to have ASII to start)
1.72 vcore
24c case temp
40c idle
45c load

Volcano II
Silicon
Case back fan sucking air out
Case close

[Slaught]

duron 800 @ 1051
1.93 vcore
25c case temp
35C idle
37-38c load

Not sure of the heatsink/fan make, but its big n loud. Also no sides on my case at the minute to keep things cooler.

[Oni]

Thunderbird 1000 (10*100) @ 1226 (8.5*144)
AXHA
1.5 Vcore
Idle = 46c
Load = 50c
FOP38 @ 7 volts
Arctic Silver II
Chipped Die
Case on

[Yxel]

1200 @ 1200
43-44c idle. 23-24 room temp. 25-26 case temp.
55 load temp.

Global win FBK with as2.

[.. AE 86 ..]

ayjha Y tbird 1ghz @ 1.53ghz
idle 42
full load 48

watercooled with radiator
open case, no case fan

amb = 25c

[ddistasio]

1.4 Ghz Athlon T-bird
Overclocked at 1.61 Ghz (11.5x140)
1.89V Core voltage
Idle 41 / Load 47
Case on
Alpha 8045 Heatsink w/ Delta 80 mm fan
Front intake fan Delta 80 mm fan
42 cfm rear exhaust slot fan

[SpEeDyGoNzAlEs]

Amd TBird 800 @ 1022
VCore 1.85 (Reported 1.92, Asus A7V)
System temp : 28ºC
Cpu Idle: 39ºC
Cpu Full Load: 54ºC
Case Closed (Wooden case, home made...)
2 InTakes (1x120, 1x80)
3 OutTakes (1x80, 1x50, 1x80 - PSU)

[Fiz]

Athlon 1000 (10X100) @ 1200 (9X133)
1.88 Vcore
42'C idle
45'C load
30'C ambient
Modded coolermaster
have case sides on


Duron 750 @ 950
1.725 Vcore
25'C idle
33'C load
27'C ambient
Modded coolermaster
have case sides on

Fiz

[demon-eater]

Athlon 1.0ghz
1.75v
@ 1.120 stupid fsb at 112mhz the only oc' i can do
20C idle (room temp 60F (16C) with case off)
40C full load
SK6 with the 8035rpm fan 55db baby yeah

with case 26C idel
48C full load

waiting for a good day to cut holes and put in my fans baby

[JAWS]

T-Bird 1.2@1.35 (9x150)
1.76 Vcore
41-42'C idle
47-49'C load
GlobalWin CAK 38
Open Case

[lonewolf1983]

duron 800@975
vcore= 1.68v
32'C idle(thanks to wpcredit)
30'C ambient
43'C full load
cheapo generic hs w/5000 rpm fan
aopen kf45case with just ps fan

[Gravity Man]

Tbird 1.4@1.599
1.95 vcore
45 load
37 idle
Water Cooled (needs better radiator/pump :mad: )
closed case

[anarki_gr]

1.2 GHz tbird @ 1413 (9x157)
1.85v
41c load
36c idle
case temp 22c
globalwin wbk38
closed case

[Fink]

1.33 AHYJA-Y 1.33
1.80 V
31C idle
42C load
watercooler - dangerden maze waterblock

Load temp really depends on water temp, which runs 2-3C over ambient and the CPU runs 8-10C over the water temp. Most of the time that equates to 40-44C under load

[moonman]

t-bird 1.4@1.55 44c idle, 52 load

[jbslow]

Athlon 1.2@1.3 (145x9)

1.85v

38°C actually this is now while I'm on the net

43°C full load

Sk6 and a big @$$ blower on the side cooling it down. Crappy case getting a Antec SX840 soon though.

[The Coolest]

T-Bird 266FSB AXIA - "9" 1200 (9 x 133)
1330MHz
1.78 Vcore
53-55C° full load
47-50C° idle
Case off
Some no name HSF but cools not that bad!

[Tebore]

AMD K6-2 300 @350 3.5x100 2.2Vcore
don't know what kinda heat sink, all i know is it's big and i paid $10 for it.
Temps: 44c idle and 52c full load rock solid stability.
4 case fans. With case

[hyperbob]

at 1.575 it loads at 43C I have TR SK6 with delta 38
at normal 1.4 it loads at 29C

[hunter00]

1.4@1.53
1.85
25
30C
air cooled
with case

[Microsoft]

celcius for all you lame people that dont know real temps

[Microsoft]

farenheight the real way to measure temps

[tbirdkiri]

1.2 MP, 1.8v, 1.533ghz, 32c, 36c, SK6, case.

umm i'm proud of myself now i need to get to that 1.6 mark stable......
:p

[hunter00]

hahahah <i>fahrenheit</i> is definitely not the REAL way to measure anything . . . celsius/kelvin are the only real temp scales . . . science, man, science . . .

[Pitspawn]

Athlon 1400 @ 1580 (10.0X158)
1.95 Vcore
38ºC idle
42ºC load
25ºC ambient
SK-6 w/ ASII & 80mm Duct
case sides OFF

Duron 800 @ 1008 (7.0X144)
1.8 Vcore
34ºC idle
42ºC load
25ºC ambient
TE w/ ASII & 80mm Duct
case sides OFF

[robertm]

With Case Rest in Sig.

[Oni]

Originally posted by Microsoft
celcius for all you lame people that dont know real temps.
farenheight the real way to measure temps.

I think you just insulted several countries. Including my own.

[Luis]

Duron 700 @ 973 (7 x 139)
1.95V
watercooled, homemade waterblock
28°C idle
43°C load
25°C ambient
case off w/120mm fan
(waiting for AS II and version 2 of my waterblock)

[earthdick]

Athlon 1.2@1.2
1.84v (Auto in Bios)
39C idle
44-48C load
22C ambient
Glaciator I
1 120mm fan front
1 90mm fan rear
one side of case off

[Genis B]

1.2 @ 1.42(142*10) just for now
case on
Themoltake Volcano 6 cu+ (7000 rpm version)
two 80mm case fans, one suck out the hot air next to the cpu and one blow air directly to the Gf3.
39 full load
42 after 3D mark 2001
1.84 V

[pik33]

Duron 750 @ 960 (7*128), 1.825 V
27-30 C idle
63-66 C load
MB: Soltek SL7KAV (VIA KT133A)
Colorful 2 fan cooler
Too small case with too weak PSU (Smile, 230 W)

[MADXJ]

1gig TBird AVIA @1333 (10x133) 1.75v Thermalrite SK6 Antec sx1035 case. Idle 37c load 40-41c. Does 1420 with about a 2c increase on both

[Wega!]

1.2GHz AXIA 9 @ 1.490GHz
1.94V
EPoX 8K7A
Load 46C
Ambient around 21C
Case side off.

[Wega!]

Originally posted by pik33
Duron 750 @ 960 (7*128), 1.825 V
27-30 C idle
63-66 C load
MB: Soltek SL7KAV (VIA KT133A)
Colorful 2 fan cooler
Too small case with too weak PSU (Smile, 230 W)

Woah! That's some high temps you got there....

[anarki_gr]

Originally posted by pik33
Duron 750 @ 960 (7*128), 1.825 V
27-30 C idle
63-66 C load
MB: Soltek SL7KAV (VIA KT133A)
Colorful 2 fan cooler
Too small case with too weak PSU (Smile, 230 W)
that's really hot!!
and 7*128 is 896 not 960. i guess you mean 7.5*128 :)

[DaveB]

Athlon 1.4 GHz @ 1.618
1.87v
37C idle
42C load
30C case
Thermalright SK6 with YS Tech 40CFM Fan
Blowhole Vent in side of case with duct to SK6

[RangerJoe34]

tbird 1.33ghz at 1.43 ghz
1.76v
33c idle
39c load
25c case
thermoengine Xtreme (with 7k fan)
ambient about 20c
side case 92mm blowing over video card and mobo.
1 80mm intake on front
1 80mm exhaust in back
with both sides on
Enlight 7237

[Genis B]

Originally posted by Genis B
1.2 @ 1.42(142*10) just for now
case on
Themoltake Volcano 6 cu+ (7000 rpm version)
two 80mm case fans, one suck out the hot air next to the cpu and one blow air directly to the Gf3.
39 full load
42 after 3D mark 2001
1.84 V

update, 1.2@1.469.9Ghz(140*10.5) dunno what full load temp is, as it has been slowly raising up from 36-46c now, and i had it on for one hours already. but i'll try to post 1.5Ghz soon:D :D :D

[Speed_Freak]

Just state your CPU, Vcore, overclocked, temp idle, temp full load, type of cooling and with case or without case

1Ghz
1.76
37C
41-52C
Water cool without radiator!
With case


1.33 gHz t-bird
1.76
46C idle
anywhere from 48-56C (56 was after running Dronez benchmark a few times)
Swiftech MCX370-OA
With case
-has 2 80mm exhaust on the sides

[WinXP]

TB 1.4@1705@2.1v (10.5x162)
idle 29C
load 40C
amibient 28C
water cooled
no case

[K808]

Athlon XP 1800
1.76v
33C Idle
Swiftech 462a
25C Ambient
25C Case
Air Cooled

[Tek]

800 T'bird at 1g with 1.89V
Idle ? "who leaves a computer on doing nothing)
Load 47C
Case Enermax CS-A1/ one 50cfm exhaust
Power Cooler PCH137

1.4 T'bird at 10x160 with 1.85V
Idle "see above"
Load 41C
Case Aopen HX08
Enermax 330W PS
SK6 / Delta 38
fans........enough to keep it airborne.

[phiber]

Originally posted by Microsoft
celcius for all you lame people that dont know real temps
ummm.... why are we lame if the whole world uses celsius and we use farnhiet?

[Genis B]

Originally posted by Genis B


update, 1.2@1.469.9Ghz(140*10.5) dunno what full load temp is, as it has been slowly raising up from 36-46c now, and i had it on for one hours already. but i'll try to post 1.5Ghz soon:D :D :D


latest update!!
1.2@1.491Ghz(142*10.5) with full load still at 46.9c point, not too much of an increament but i am on my way to 1.5Ghz!!! men i love this Volcano6 Cu+ babe:D :D :D

[jbslow]

Originally posted by Genis B



latest update!!
1.2@1.491Ghz(142*10.5) with full load still at 46.9c point, not too much of an increament but i am on my way to 1.5Ghz!!! men i love this Volcano6 Cu+ babe:D :D :D

Nice work I wasnt able to get my 1.2 over 1.47 at 1.85v core but it could be a power supply issue.

[Genis B]

@1.85V i cant even get pass 1.42Ghz, so u did way better than me. btw i haf change bak to 1.469 coz it freeze every hours for no reason.

[.. AE 86 ..]

my friend's duron 750 runs at 75c idle constantly...
the computer is placed in a cupboard which traps heat...
the motherboard runs at 68c...
and is still working after a year's torture :D

[Mr.Lansing]

Tbird 1.2Ghz@1360 (8.5x160)
Vcore @1.75
w/CAK38 HSF (7V mod)

idle = 37C
full load = 46C

[mcrites]

tbird 1.4
vcrore @ 1.76
watercooling with dd cube and maze2
idle = 35C
load = 39C

[zangler]

1.4@1.55
1.85v
44c idle
49c load
sk-6 with delta 30cfm fan
case

[m1066ad]

1.33, running from 1.2-1.44 (still experimenting)
27c, right now
46c-60c, under load
1.85vc(default)
HSF=yes
open case

[Tobes]

Originally posted by .. AE 86 ..
my friend's duron 750 runs at 75c idle constantly...
the computer is placed in a cupboard which traps heat...
the motherboard runs at 68c...
and is still working after a year's torture :D

I wonder if we enthusiasts are overly paranoid about heat?

I bet there are 1000's of PC's out there, running temps like the above, that are perfectly fine.
Most 'ordinary' people with an AMD PC will never look at the temp.
It could be a case of 'ignorance is bliss'.

BTW my temps are:
41C idle
48C full load (ambient ~20C)
Case closed - has to be, for proper airflow past components.

*Note - CPU now at 1606, 11x146, 1.75V.
The sig editor doesn't appear to work!

[Bruin]

Originally posted by Tobes


I wonder if we enthusiasts are overly paranoid about heat?

I bet there are 1000's of PC's out there, running temps like the above, that are perfectly fine.
Most 'ordinary' people with an AMD PC will never look at the temp.
It could be a case of 'ignorance is bliss'.



All I know is, my comp used to lock up 3-4 times a day with an Asus A7V, T-Bird 900. Mobo reporting temps of 73 cpu, 40 mobo.

Changed a couple things, was able to drop cpu temp to 67-69, lock ups only came 1-2 times per day.

Bought a Millenium Glaciator and CPU is now about 49, no lockups whatsoever.

[Qualtran]

1.533Ghz
1.894V
58C Idle
63C Full
Global Win WBK38 with 80mm 7000rpm fan
Antec Server case w/ 4 case fans
:mad: Hot Mofo huh?:mad:

[TranceBear]

See sig

[Maximus Nickus]

In the Avatar!

[pik33]

... yes, my Duron works at 7.5*128 MHz :) error when typing...

About temperature paranoia... this Duron worked at 73C... :) but when testing at 1000 MHz... prime95 works fine until temperature is lower than 60 C. Then it fails.

[Element-Xero]

1.1 GHz (100*11) T-bird @ 1271 (121*10.5)
1.85 Vcore
37 Idle
44 Full load
with case

[Oneiron]

1,33 @ 1,53
1,80 Vcore
33C Idle
39C Load

WBK38
w/ CASE

[Dissolved]

right now..
27C room temp
56C cpu (full load seeing i run United devices)
23&28C case temps (mbm5 says 2 different case temps)
amd TB 1.4@1.4
Alpha 8045 w/ nanotherm & 39CFM sunon
Side panel off
4 case fans.

[michaelf3]

1.4 GHz T-bird @ 1533 (146*10.5)
1.825 Vcore
40 Idle
53 Full load
air cool with case

[Madradog]

In response to :
__________________________________________________ __I wonder if we enthusiasts are overly paranoid about heat?

I bet there are 1000's of PC's out there, running temps like the above, that are perfectly fine.
Most 'ordinary' people with an AMD PC will never look at the temp.
It could be a case of 'ignorance is bliss'.
I wonder if we enthusiasts are overly paranoid about heat?

__________________________________________________ __

I think you might be right. My chip got abused by an ignorant newbie (me) when I decided to go out and build a computer. apparently (found out after the fact of course) I installed the heatsink backwards on the first setup (case/mobo combo that was cheap) I returned it, and got an I will kk266+R and Antec mid tower. Well, when i installed chip in new board, I didn't know about the thermal compound. Used the same stuff. It is the sticky putty type on stock AMD heatsink. I came to this site and learned. Now i have volcano 6cu and arctic silver II and am running @35C not overclocked yet. I still have much to learn. However, with the case closed it was running at 65 C with at least having the heatsink the right way round, but also having ineffective thermal paste. It still runs great. It even had a corner chipped off the core in all this madness. I can't believe I have a chip.

Athlon T-Bird 1.1Gig AXIA-Y (I checked while I was cleaning paste off of it for clean install per arctic silver website :)
Antec case - sides still off
Thermaltake Volcano 6cu - 7000rpm
95F idle 102 full load Q3 arena with full textures
Ati rage 128
32x12x10 cdrw

[Fiz]

I don't think it is so much being paranoid as cautious. Think about it, when you pump 1.9+ volts into a proc that is only supposed to run at 1.6 or 1.75 heat becomes a very deadly enemy. Also, the cooler a semiconductor is, the more efficiently it runs. Perhaps dual pelt cooling or building your comp into a fridge is a bit much, but I think getting a good hsf and slightly modding your case is well within reason. These procs will run at 65'C, but do you really want to run it that warm. Your car will run with the coolant half empty, but I really doubt you would drive it that way, I look at my proc the same way. Why run at 60 or 70'C when I can run it at 45 or so. That's my $.02

Fiz

[Element-Xero]

EDIT__IGNORE THISs, POSTED ON WRONG THREAD:confused: __

Well the first thing I did was close every prog except systray and explorer, before I even came here, and I'm not running Seti or Folding, and I also am not using any cooling software. But, even with systray and explorer only it showed 100% totally unfluctuatingly (word?) for about 30 minutes. So, I tried restarting and when windows booted, even with all my startup progs running, it was back to like 3-13%. Wierd, I guess....no harm done though.

Hey another wacky thing I noticed:
When I am not moving my mouse (Microsoft Intellimouse Explorer) the monitor reads about 15%ish and when I am moving it, it reads about 3%. Seems like it should be the other way around.

[Tobes]

Originally posted by Fiz (The Ringmaster)
I don't think it is so much being paranoid as cautious. Think about it, when you pump 1.9+ volts into a proc that is only supposed to run at 1.6 or 1.75 heat becomes a very deadly enemy. Also, the cooler a semiconductor is, the more efficiently it runs. Perhaps dual pelt cooling or building your comp into a fridge is a bit much, but I think getting a good hsf and slightly modding your case is well within reason. These procs will run at 65'C, but do you really want to run it that warm. Your car will run with the coolant half empty, but I really doubt you would drive it that way, I look at my proc the same way. Why run at 60 or 70'C when I can run it at 45 or so. That's my $.02

Fiz

I agree voltage contributes greatly to heat. Don't pump it up any more than you need to acheive stability.

I ran some figures through the 'Radiate' program.
It says my chip at 1606 and 1.75 volts has a thermal output of
82.6W.
If I were to up the voltage to 1.90V the thermal output would be 97.4W!! That's alot of extra heat to get rid of if it doesn't contribute to more stability.

As far as I can tell, my setup tests perfectly stable at 1.75V and this allows me to get away with a less noisy HSF.

BTW with the Vcool program running my current net surfing temp is 27C!

[Element-Xero]

I was always trying to keep my CPU temp below 40C load, but thanks to this thread I see that most people (aircooled people, that is) have about 50C load, which means I can try to pump a little more out of my chip :0

[fuzzba11]

Duron 750 running defaults(backup chip, can't fry it!)
DD Maze2-2 with 122W Pelt(since today! woohoo!)

Idle: 22 C
Load: 28 C

Water temp: 22 C

mmmmm, it's good to be sub 30 C!

[Blackearth]

1ghz@1333mhz, idle:38c, load:44c. i have the Vantec FCE-62540D Socket-A/370 Cooler w 2 Delta 38 cfm fans on it.

[!-=sky=-!]

i m formatting my first rig but second rig

Just state your CPU, Vcore, overclocked, temp idle, temp full load, type of cooling and with case or without case


duron 600@1035, 1.87v reported by mbm5
idle 35C, full load 47C, room temperature around 28 to 30C during the day
cak38 with delta and 3 panaflo 90mm fans and psu fan..
open cased since my sister's room is too hot

[Madradog]

Originally posted by Fiz (The Ringmaster)
I don't think it is so much being paranoid as cautious. Think about it, when you pump 1.9+ volts into a proc that is only supposed to run at 1.6 or 1.75 heat becomes a very deadly enemy. Also, the cooler a semiconductor is, the more efficiently it runs. Perhaps dual pelt cooling or building your comp into a fridge is a bit much, but I think getting a good hsf and slightly modding your case is well within reason. These procs will run at 65'C, but do you really want to run it that warm. Your car will run with the coolant half empty, but I really doubt you would drive it that way, I look at my proc the same way. Why run at 60 or 70'C when I can run it at 45 or so. That's my $.02

Fiz

__________________________________________________ __

I agree, all I was saying is that many computers are abused like that, and keep going for a long time. In my case, It ran at around 150F for about a month and a half and suffered a cracked corner during an improper installation (again, by me) However, I do now know to respect my chip if I want to keep it. I have a new Thermaltake Volcano 6cu that is keeping it nice and chilly at around 35c with the sides off, and a nice precisely applied layer of arctic silver II. It is only 15F warmer than ambient room temp. I ran quake III at hightexture for a while, and it never got above 100F. So let us say, that the lesson has been learned, but like I was saying, I am using the same chip right now, and I haven't had an error message, or a shutdown in about a week. who knows, sometimes you just get lucky.

1100Mhz (11x100) AXIAY at 1103 (according to MBM5.9)
I will KK266+R @ 100
512mb Pc133 SDRAM
ATI rage 128

[supraway]

Mine:
Computer in signature

49 C idle
58 C load
27 C case

This is all with a 1.33 @ 1.33 1.75 Vcore, Alpha Pal6035 heatsink w/ Global Win 27 CFM fan, 2 30 cfm case fans, and a finely applied layer of Arctic Silver according to directions. One day, playing with the heater in my dorm, I turned the heat up to about 85 F, processor went to 70 C pretty quickly (using Prime95). This computer almost never crashes, no matter what the temperature. I took special care to accurately or even over- measure the temps by bending the thermal probe to touch with the processor, a small glob of thermal grease to touch the two, and besides that, MSI tends to over-estimate temperatures. One of these days, I would like to get an accurate thermal probe down there, to see what exactly the temperature is.

Second computer:

Basically the same, even in the same dorm room, only this one has no case fans, a Volcano 2, an Epox 8k7a+, and is overvolted. Reported temperatures are:

40 C idle
49 C load
28 C case

This shows the inaccuracy of either MSI or Epox, I'm not exactly sure which.

[supraway]

btw, the signature temps were from a different room (much cooler than this)

[Element-Xero]

I just modded my case with a 120mm "industrial" brand fan in the top back and another in the front bottom, and I also re-wired everything so there is almost nothing in the way of airflow, plus I have rounded cables. New Overclock! New Temps!

1.1 GHz ASHHA (100*11) @ 1.35GHz (135 * 10)

load is avg of Sandra CPU burn-in test running in loop 90 times
CPU temps-
idle-35
load-42
case on

S airflow pattern rules!

[LinkStatic]

Duron 850 AKCA @ 1031 ( max 1050 ) 1.8V Core
Idle: 32 ( cpuidlepro5.8 )
Full: 46 ( prime95 and Sandra CPU burn-in test running sidexside )
WBK38
Silicone Thermal Compound
MiniTower case with 2 case fans...( sides off )

[namelessone]

Cpu is an Athlon 1.2 MP @ 1.53 (9x170)
Vcore is at 2.04
System temp is 24C right now
Cpu idle temp is 32C, cpu full load is around 34-35C w/ Swifty MC-462
Case is Coolermaster ATC-201 w/ 4 sunon high cfm's fans instead of the stock junk fans

[Warlord2]

1.2@1.4

1.89vcore

33c idle
35c load
with water cooling with 2 radiators

[heavy1]

duron 700 @ 807
1.76v
idle - 47
load - 53
Thermaltake orb (sucks)
no case

Heavy

[keio]

Athlon 1000@1200 AXIA (160*7.5)

default V core
39C idle
45C load
air cooled with Coolermaster with thermal
with case on

[Defender]

TH 800 OC to 1050

1.85 (Need a Resistor for volt-mod)

23-25C IDLE

32C Medium load (3dMark 2001)

36C FULL LOAD(DVD-RIPPING)

Water cooling (swiftech 462B-Tec ,156W Peltier
,Black ice Radiator, 1 Titan 120 mm 74.15CFM Fan on Radiator)
2 L WaterTank inside the Case

With case (Buying a bigger ,so i can have 2 Radiators and better AirFlow + bigger watertank)

[kwoon]

TH 800 OC to 1050

1.85 (Need a Resistor for volt-mod)





what your tipe of your mobo
or you can find in www.ocinside.de

my mind
duron 1060
thermal take volcano
@38c
Load@40

[AlanSr]

1.2 O/C 1.42
Idle 27C
Load 35C
default volts
Air cooling.
2 Comair Rotrons

[cmcquistion]

1.4 Athlon at 1584 MHz (11 * 144) on an FIC AD11 motherboard.

39C (102F) full load
24C (75F) system temp

watercooled with Jagged Edge waterblock, Eheim 168 gph pump (I can't remember the model #), Aquacoil Radiator, one 80 mm "Silencer" fan and two 120 mm fans, turned all the way down (very quiet) with 25 Ohm Radio Shack Rheostats.

[Hugo 59]

1.33 @ 1.5
1.85
36C idle
46C load
Swifteck MC370-0A

[Amati]

xp1700 stock, 1.45v, 28-30c on mobo temp sens.