AMD 700Mhz Duron

[Haku]

I have a 700 Mhz Duron, with an MSI K7T Pro Motherboard.

What is the highest I can overclock this and how would I do it, and what do I need??

I have never overclocked before, but I am an electronics engineering technologist. So I think I can take the task on!! :)

you can email me at ddonais@dryden.net or just reply here.

Thanks
Daryll

[JAWS]

Welcome to the forums. I had my Duron (stepping AKCAR) up to a max 980. You might want to check to cpu database to get some ideas.

[Wega!]

It's very hard to say, it depends on a lot of things. Things like what stepping the CPU is, what cooler you use, how good your heat transfer is from the CPU to the HSF, etc.
There is a lot of things that has something to say, but the easiest way to find out, is to give it a try. Just be sure to keep an eye on the temp's, don't go above 60C!
Good luck :)

[brennan77]

I have a 750 AKCA that does 1104 pretty stable. 1095 rock solid. I could use a little more voltage.

[SickBoy]

Link to the FAQ in my sig. Should answer some basic questions. You'll need to:

1. Unlock your CPU
2. Play around testing its limits at stock voltage.

I imagine your chip should do at least 800 or 850 MHz without upping voltage. I had a AMCA Duron 700 and my final overclocks were 970 MHz at 1.85 volts (maximum under available settings) and 1 GHz at 2v (after volt mod to motherboard).

SickBoy

[Ace]

You have to choose how you want overclock. 1.You can set up your FSB in BIOS.2 You have to unlock your Duron. Then you have 2ways- you have to cange multiplier on processor, or in Bios- (in case your MB support it). I have Duron650 on mainboard MSI-K7T Pro 63-30 and I have same problem. I have FSB set to 110 and it runs at715Mhz.

[chasingapple]

Mine used to run 24/7 @ 980Mhz...I hit 1Ghz on a very cold winter day once, hehe.