can anyone talks their ocz Pc4000 EB experience??

Cemson · Oct 29, 2005

I want to buy one of this, thanks.

Cemson · Oct 29, 2005

No One been use this ram??

SteveOCZ · Oct 30, 2005

They are great

If you do get them here are some timings for the DFI to get you started

In Genie Bios
250
auto
16 16
8
100
disable
1.425v
1.325v
above VID 110% (this combo is for 90nm cores)
1.30v
1.60v
2.7
+0.3 if not 3.2V = enabled

DRAM Config

200
enable
3
3
7
2
13
16
2
2
1
3
1552
auto
enabled
auto
0
Level 8 (normal 4 in 704-2BT bios)
level 2
8ns
normal
6ns
256
disable
16
07
disable

Pyr0 · Oct 31, 2005

thanks Steve

(nice avatar by the way

)

i've got these sticks on pre-order, and will have them by friday (hopefully)

i've read that memory settings can differ from cpu to cpu, will these settings work with an X2 chip?

SteveOCZ · Oct 31, 2005

X2 is no problem

Let me know if you have any problems

Cemson · Oct 31, 2005

my X2 working at 2.6GHz, so I hope the EB ram can works at 260MHz 3-3-2-8, is it posssible???

SteveOCZ · Nov 1, 2005

Most sets are doing at least 270FSB and I've seen 280 or more with a few

Tekko · Nov 1, 2005

SteveOCZ said:
They are great

If you do get them here are some timings for the DFI to get you started

In Genie Bios
250
auto
16 16
8
100
disable
1.425v
1.325v
above VID 110% (this combo is for 90nm cores)
1.30v
1.60v
2.7
+0.3 if not 3.2V = enabled

DRAM Config

200
enable
3
3
7
2
13
16
2
2
1
3
1552
auto
enabled
auto
0
Level 8 (normal 4 in 704-2BT bios)
level 2
8ns
normal
6ns
256
disable
16
07
disable

Do thoses setting apply on the DFI CF-DR too?

Xoligy · Nov 1, 2005

yeah i like steve's ava too she's pretty

oh im getting this memory i think lol reminds me i'll message the guy tomorrow about it lol

Cemson · Nov 1, 2005

I just ordered....probably get it soon.

H2 · Nov 2, 2005

SteveOCZ

Now you have me excited to try that ram with all the settings. My X2-3800 is super stable at 2700mhz but I need some ram to run at that speed and I want to jump to 2gig so I think you just pushed me over the edge.
If I could get that ram to run at 270mhz with those timings that would be great!
Thanks for posting all of the Bios settings!

Pyr0 · Nov 2, 2005

is there any substance to the issues they mention in this review?
or is it dependant on the individual cpu core, and memory controller?
http://www.insanetek.com/review.php?id=92&page=3

H2 · Nov 2, 2005

Pyro,

HTML:

is there any substance to the issues they mention in this review?
or is it dependant on the individual cpu core, and memory controller?
[url]http://www.insanetek.com/review.php?id=92&page=3[/url]

That was a very interesting review. I seem to have a similar problem with my OCZ Platinium PC3200 rev2.

My X2-3800 runs all day stable Prime95 at 2700mhz as long as I run my memory with the 5/6 divider at 225mhz 2-3-2-5 at 2.9v

The memory will run 270mhz with loose timings ok if I run the CPU at not over 2550mhz. Very Wierd!

I think the memory controller has something to do with this but I'm not sure.

I think I'm going to get a set of the 2gig Platinium PC4000 OCZ and give them a try.

SteveOCZ · Nov 2, 2005

Pyr0 said:
is there any substance to the issues they mention in this review?
or is it dependant on the individual cpu core, and memory controller?
http://www.insanetek.com/review.php?id=92&page=3

Some of the cores/batches of CPU's didn't overclock well at high FSB speeds. That means on those CPU's you'll not be able to run them at high FSB speeds with the CPU heavily overclocked as well.

Tony posted some info here
http://www.bleedinedge.com/forum/showthread.php?t=11099

SteveOCZ · Nov 2, 2005

Tekko said:
Do thoses setting apply on the DFI CF-DR too?

That one has the ATI chipset so timings will be different. I wonder if Tony has that board alread....going to ask him now :santa:

Pyr0 · Nov 3, 2005

my sticks arrived today
i've only had a little fiddle so far...
i can memtest them at 269MHz, but if i try 270, i keep getting errors at the end of test 5

i can boot into windows at 261-265 (cpu multi 10x), but when i get to the desktop my monitor starts flicking on and off

, 260MHz and below is fine :shrug:

at the moment i'm running at 11x250 and it seems more stable than with my geil memory (crappy hynix)

these are my current settings

i would've liked to get 265x10, or 270x10 (my temps @2750 peak at 50-52C), but i'm not sure if my memory controller is limiting me :shrug:

any help would be really appreciated

thanks in advance

Pyr0 · Nov 10, 2005

has nobody got any ideas what could be causing the monitor to click on and off repeatedly??
if i run dual 32m super pi, and ignore the monitor, then it will pass without any computational error, but obviously the computer is unuseable like this
Steve? any ideas?

Pyr0 · Nov 11, 2005

nobody?

SteveOCZ · Nov 11, 2005

Pyro are you running the timings I posted for the DFI? Which bios are you using right now?

Pyr0 · Nov 11, 2005

Hi Steve, thanks for replying, i really appreciate it,
this has got me going out of my mind with frustration :bang head

i'm running tony's 704-2bta bios
i've tried those settings above, but no go above 260MHz, even with an 8 or 7 multiplier
everything seems fine until i get to the windows desktop, then the monitor goes mad

i also just tried dropping the latencies to 3-3-3-8 2T, without success
while i've been typing this, the screen has clicked off at least 6 times
sometimes it will turn back on straight away, other times it will stay off for roughly 10 seconds

can anyone talks their ocz Pc4000 EB experience??

Member

Member

The OCZ guy

Member

The OCZ guy

Member

The OCZ guy

Member

Member

Member

Member

Member

Member

The OCZ guy

The OCZ guy

Member

Member

Member

The OCZ guy

Member

Similar threads