whitebloodcell
11-01-05, 03:42 PM
Finally got my new computer fully going. But having problems with my Speakers, I am using the DFI Ultra-D boars and the accompanying Karajan Audio Module for sound output. Speakers are a set of Dell ADA995 5.1 (soon to be replaced thankgod)
I connected the three cables (I forget the name, but Yellow Black and Green) and booted up. Thought everything was OK, but no sound. So I went through the options in nVidia Mixer Application (seemed to be the default thing)
I set the speaker set up to 5.1, I got sound though the two rears only. Obviously not ideal. I then ran the Speaker Setup wizard (where it plays white noise supidly loudly through each speaker)
First step, through all the Speakers, noise is heard through all on the ANALOG output, none through Digital.
Testing Left Front Speaker - I hear a click/pop (just one), I can't seem to discren where it comes from. Either just the left front or other speakers aswell.
Right Front - Nothing. No clicks
Centre Speaker - High pitched Squeak
Left Rear - White Noise
Right Rear - White Noise
Labled Left Side Speaker (though actually Left Front) - White Noise
Labled Right Side Speaker (though actually Rigth Front) - White Noise
Subwooker - Low pitched Rumble
Rear Speaker Encoding Mode.
Sounds comes out through Front and Rear Left and Right.
Wizard then sets to 7.1 Output.
Why is it doing this? Why wont my Speakers work normally? If you need more information I will happily give.
I connected the three cables (I forget the name, but Yellow Black and Green) and booted up. Thought everything was OK, but no sound. So I went through the options in nVidia Mixer Application (seemed to be the default thing)
I set the speaker set up to 5.1, I got sound though the two rears only. Obviously not ideal. I then ran the Speaker Setup wizard (where it plays white noise supidly loudly through each speaker)
First step, through all the Speakers, noise is heard through all on the ANALOG output, none through Digital.
Testing Left Front Speaker - I hear a click/pop (just one), I can't seem to discren where it comes from. Either just the left front or other speakers aswell.
Right Front - Nothing. No clicks
Centre Speaker - High pitched Squeak
Left Rear - White Noise
Right Rear - White Noise
Labled Left Side Speaker (though actually Left Front) - White Noise
Labled Right Side Speaker (though actually Rigth Front) - White Noise
Subwooker - Low pitched Rumble
Rear Speaker Encoding Mode.
Sounds comes out through Front and Rear Left and Right.
Wizard then sets to 7.1 Output.
Why is it doing this? Why wont my Speakers work normally? If you need more information I will happily give.