PDA

View Full Version : Quick duron/voltage question


peppy
10-22-01, 10:46 PM
Any one know the standard v core for a duron 650, any one got past 8X multiplyer with one?

]-[itman
10-22-01, 11:27 PM
I don't own one so I did some searching for you. The standard voltage is 1.5v. As far as the the multiplier i checked the cpu database and yes ppl have gotten above 8x multiplier. I double checked incase you were wondering some got above 8x using only air.

FRANK
10-23-01, 01:19 AM
I've had very good results with a couple of AKBA DURON 600's. I don't remember what the default voltage is but I've run them at 1.85 / 1.92 with no problem.

The maximum multiplier I've gotten to is 10X (10*110 an an ASUS A7V with the KT133 chipset.) I had no reason to try any higher, I had hit 1100MHz at that point and found that to be the max for that particular CPU motherboard combo.

I've also successfully run the FSB as high as 140MHz on an ASUS A7V133 with the KT133A chipset (140*8.)

This was done with air cooling.

I hope this helps,

Good Luck!