CD burner not working...HELP PLZ

[DietPepsi0219]

so my "(Standard CD-ROM drives)" cd burner isnt working...when i try to burn a CD using any software the disc doesnt burn correctly and ends up unusable...my drivers are up to date according to microsoft, i tried to roll them back *incase they were somehow updated without me knowing and that update screwed them up*...but it said there was nothing to rollback to.. heres NERO's log for when i try to burn a disc...

3:42:06 PM #2 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

3:42:06 PM #3 Text 0 File Reader.cpp, Line 126
Reader running

3:42:06 PM #4 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST CD-RW GCE-8483B running

3:42:06 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

3:42:07 PM #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media

3:42:12 PM #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 348891 ( 77:33.66)

3:42:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

3:42:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HL-DT-ST CD-RW GCE-8483B;
CDR code: 00 97 28 12; OSJ entry from: GIGASTORAGE CORPORATION
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1C 0C (LI 97:28.12), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

3:42:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

3:42:12 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 348892 (348892) = #348892/77:31.67
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 348890 blocks [HL-DT-ST CD-RW GCE-8483B ]
--------------------------------------------------------------

3:42:12 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST CD-RW GCE-8483B ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 714838016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
348892 | lead-out | 1 | 0x00 | 0x41

3:42:12 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 348892 -> 348890.

3:42:12 PM #14 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

3:42:13 PM #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

3:42:13 PM #16 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

3:42:13 PM #17 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 40x (6,000 KB/s)

3:42:13 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:42:13 PM #19 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON

3:47:16 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

3:56:16 PM #21 SCSI -1169 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

3:56:16 PM #22 CDR -1169 File ThreadedTransferInterface.cpp, Line 1830
Logical unit not ready, operation in progress

3:56:16 PM #23 TRANSFER -18 File ThreadedTransferInterface.cpp, Line 1830
Could not perform EndTrack

3:56:46 PM #24 CDR -1175 File Cdrdrv.cpp, Line 1249
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 5A 00 05 00 00 00 00 00 48 00 00 00


3:56:46 PM #25 SCSI -1169 File Cdrdrv.cpp, Line 1250
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x035522A8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

3:56:46 PM #26 CDR -1169 File WriterStatus.cpp, Line 245
Logical unit not ready, operation in progress

3:56:46 PM #27 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

3:56:46 PM #28 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

3:57:16 PM #29 CDR -1175 File Cdrdrv.cpp, Line 1249
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 5A 00 05 00 00 00 00 00 48 00 00 00


3:57:16 PM #30 SCSI -1169 File Cdrdrv.cpp, Line 1250
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x035522A8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

3:57:16 PM #31 CDR -1169 File WriterStatus.cpp, Line 245
Logical unit not ready, operation in progress

3:57:16 PM #32 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

3:57:16 PM #33 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

3:57:46 PM #34 Phase 39 File dlgbrnst.cpp, Line 1855
Burn process aborted

[dicecca112]

what drive might help as well as if you have updated the firmware, does it do this with all disks, have you tried another. I have only gotten that error with a bad disk

[DietPepsi0219]

yes ive tried about 20 disks over the last half year...none of them have worked..what do you mean "what drive" when i look in the device manager it says "(Standard CD-ROM drives)"..and i have no idea where to get updated firmware because im unaware of a "standard cd-rom drives" company....dell needs to stop being gay and lose the intel processors and start making decent computers


in device manager the drive is titled HL-DT-ST CD-RW GCE-84838