how do i overclock my 300A celeron up to 450 mhz?

[copycat]

i have a qdi legend VI motherboard and i can only set the FSB at 83mhz.any other solutions to make the FSB 100mhz?

[Jon]

If the motherboard only has jumpers for system bus manipulation and only goes to 83MHz then I'd say not.

If you have a SoftMenu type BIOS that allows you to change your system bus there, then a BIOS update may include a setting up to 100MHz.

[Yodums]

If your motherboard isnt as modern which I dont think it isn't , try using the SoftFSB or CPUFSB...

Should help ...

[Sir-Epix]

Even if you get up to 100MHz FSB it will prolly freeze. You are probably going to have to bump up the VCore as well. Just letting you know.

[tainice]

check this article(http://www6.tomshardware.com/cpu/98q2/980514/celeron100-01.html)
out, it is designed to make ur cpu running at fsb of 100 on any bx mobo. so if you are interesting, just check it out. anyway, i have tried this on my own PII 233 and it is now running at the speed of 333, but you probably need to change your vcore to 2.1. otherwise, you may experience instability.

[LutaWicasa]

Nope. That is an old LX chipset board, top was 83 MHz.