Having trouble believing these temps..

[touser]

hi all I am having trouble believing the temps MBProbe and MBM5 are reporting, I know that the built in temp diode on the p4 is supposed to be very accurate but according to it I idle at 40c and full load at 44c, it never goes under 40c and never goes over 44c, I am watercooling and the specs are in my sig and this is why I cannot believe these readings because according to my digidoc the difference between the full load and idle is a bigger gap but much lower temps, only 27.3c according to it while typing this 3 minutes after running a cpu warmer program.. my question is which do i believe the supposedly very accurate diode built into the cpu or the digidoc? Any help or comments are greatly appreciated!

[Yodums]

Does seem weird but you may want to ask pentium with P4 already.

[PipeBom]

Not too sure either... I was/and still having the same problem. I don't have a digidoc but using software to monitor my temps. All I know is that software monitoring is reasonably inaccurate. I would be tempted to go with the digidoctor with this one as it was built specificly to monitor temps. I think that 27 or so degrees is about right as intel chips run fairly cool, and with water cooling, your temps should drop a fair bit. Only speculating here, as I have no proof or experience with P4s.
:)

[touser]

thanks for the reply's guys