- Joined
- Sep 11, 2005
- Location
- Yorkville, IL
Here are some pics of my watercooling setup. Lemmie know what you think about it.
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
5|*42 said:Looks pretty good, how are the temps? Also, what hardware are you using?
Rysjimmy1994 said:Ambient is about 68 degrees F. I am still kinda worried about leaks... It is still moist by the middle barb. I am going to take it apart tomorrow and drain the fluid out and put it back on air momentarily till I get my fill port. I dont know if I want to keep the radiator where it is, chop out my hdd cage, or just mount the radiator on the top of the case...
I'm Here to learn so tear it apart. If ya **** me off, I'll let ya know. The bottom line is whatever you have to say is just simply your opinion. So let me know what your opinion is! I am interested in maximuim cooling performance with the hardware that I have. This is my first watercooling rig, so any and all information would be helpful. I am back on air now for the time being anyhow so now is the time to offer suggestions before i put it back together this weekend. Also, should I switch to 3/4 OD by 1/2 ID or stay with 5/8 OD by 1/2 ID for my tubing?Senater_Cache said:I wont even get into this because everytime I rip something like this apart, someone gets ****ed. It is apparent that you are either not interested in max-performance, uneducated or just ignorant. Just for looks, everything goes, and once again, nobody notices the shortcomeings.
Senater_Cache said:get 3/4 OD tubing which will take care of the very serious kinking you have everywhere.
Turn your rad around instead of making th etubing curve out of the case towards and around the rad. Remove the 90 degree angle at th epump outlet (why have one there if everywhere else you are bending your tubing in huge radii.?) What are the tubes leading to towards th etop of the case? if res, move closer to the pump. Turn your pump onto its BACKSIDE (inlet facing up , outlet facing left. ) Use th eleast tubing possible. Oh and also, you are supporting your Rad with 2 rods only?....just doesnt looks afe / stable.