L7 Bridge.

[Diu]

I tried to connect all the Bridge for L7 by using a Pencil,
but it doesn't seen to work.

How come?

[WyrmMaster]

You might have shorted two of teh brigdes together, wipe the lead off and try again. Also, use a hard pencil, #3 or so. A #2 can have to much clay and not enough graphite to conduct well.

[Diu]

Woohoo....

I am @ 1.90 Voltage now..!

[Diu]

My 5v line is below 5...

Average around 4.89..
Lowest is 4.84..
Highest is 4.92..

Is it still ok for the PSU to use?
or getting a new one?

cuz i am going to change to athlon lata though..

[Wahoogie]

Well, the voltages in PSU's are usually rated in +/- 10% or 5%. Keep in mind, 10% of 5 is .5, and you DON'T want that. You also Don't want 5.5.... As long as you're within .05-.1 then you should be ok. Mine minimum is 4.95 and max is around 5.06.

[oc jason]

do you know if this is same with Tbirds, i tried it with my l7 and got no diference, ill try a harder pencil.

[Diu]

Will this be enough for a 1.4 Ghz Athlon?
cuz i am upgrading soon..