Can you help clock my cpu please!

[phully]

right, i have:

166 mhz P1 Intel
90 EDO RAM.

Basically crap! Is there anyway i can clock my cpu? I have changed the jumpers and its now running 198mhz but i dont know what to do, i am new to all this, can anyone help?

Thanks in advance,

Phully

[Bmxpunk86pl]

what do u need help with exactly? be more specific and we could help u. basicall u overclocked it from 166 to 198mhz! not a bad start!! just make sure ur temps dont get too high. if u wanna go faster then change the fsb speed more or the multiplier more.

[phully]

how do i change the FSB speed and multiplier? Sorry im new to this so. Please if you could help i would be very greatful, its a packard bell, please gimme some advice on how to chgange the FSB etc and where to look.
Thanks

[Bmxpunk86pl]

ur front side bus (fsb) is what connects the cpu and memory together. the multiplier is the thing that multiplies ur FSB because ur cpu is a lot faster. on ur 166mhz cpu ur fsb speed was 66 and the multiplier was 2.5. now when u overclocked the 166 to 186 you changed the multiplier to 3 with gave u 198 (3*66). if you wanna go faster then change ur fsb speed from 66mhz to 75mhz and u will be at 225Mhz!!!! if u dont understand what i mean then just reply to this post again and me or someone else will help u. good luck