KLE133 Chipset [Archive] - Overclockers Forums

iggybaseball

11-01-01, 04:32 PM

ok, my mb, MS-6378 HAS THE KLE133 Chipset. It does not let me change the Vcore or multiplier, only the FSB. But i cqant' get past 107 w/o getting a windows error. The temp is only 22C and the vcore is set at 1.62. If I connect the L7 bridges and pump in more power, will i might be able to crank up the FSB higher?

iggybaseball

11-01-01, 07:42 PM

any1?

Angry

11-01-01, 08:52 PM

honestly I have never heard of your chipset...whats your cpu?

iggybaseball

11-02-01, 05:18 PM

Duron 800. Its a kinda old chipset but it suports a 1.4+ cpu.

Oni

11-02-01, 06:00 PM

KLE133? WTF is that? Who makes your board?

minoukat

11-02-01, 06:06 PM

here's a review of that board I found on yahoo :
http://www.techgamer.com/reviews/motherboards/msi6378/

sincerly, I've never heard of that chipset before.

iggybaseball

11-03-01, 11:02 AM

well, generally speaking, will it help out the fsb?

bergie007

11-03-01, 11:52 AM

Your chipset is a VIA-built chipset that is a KT133 with built in vga, sound,NIC,modem etc depending on your mobo. Just as VIA released the KT133 and KT133a chips, they released KLE133 and also KM133 and KM133a chipsets with the 'a' designating 133MHz fsb support. (go to http://www.via.com.tw/jsp/en/products/apollo/KLE133.jsp for more info) The plain old 133's were limited by VIA and could do max about 120Mhz fsb. Ty to set your board to 133mhz fsb as the chipset should take it. It may be the built in AGP2X is limiting you, try a PCI vga card and see if it helps? I doubt that more voltage would do anything except damage your chip though. Sorry 4 the bad news (but take a look at my AWSOME rig to cheer you up :D )
Good luck