Water Bongs Showerheads

[junk301]

does any one have any recommendations for a showerhead for a water bong I need to get a good one. I have a mag drive 250gph pump and need a shower head. Any name brand ones that I can get in a store like home depot or some other kind of store local I live in a large city so finding one shouldnt be too hard. thx

[JoeCrappa]

You can get this showerhead. do what this guy did and it works fine :) . so long as you glue enough that your streams come out individually. here's the pic of the shower head: http://www.overclockers.com/tips464/showerhead.jpg its called an aerator. and its pretty cheap. $3-$4 at a hardwares store. you should also read this article about how he modded his shower head http://www.overclockers.com/tips464/ . with that pump i dont think you'll be getting too much of a high flow when you get to the showerhead so this should be fine. CHEAP TOO!

[Colin]

Look for a Dram 300 hole head that is used in garden wands. They are about $4.

[fatshlink]

uhh just a thougnt, a lot of garden hoses have misting deelies on them. Wouldnt this be ideal??

[CrystalMethod]

I was thinking the same thing. A couple of things I came up with why it's not used (at least not that i've heard of), is that...
-1: The mist would evaporate too quickly, requiring constant monitoring of water levels.
-2: The mist would shorten the life span of the fan used.
-3: The mist would short out the fan.

Just a couple of thing that I thought MIGHT happen, but I don't know for sure because I haven't played with bong cooling...
...yet....

[Colin]

And misters are low volume, high pressure devices. The Dram is a high volume head that will work with low pressure.

[Morphoius]

I am using the hose thing off of the merical grow ganden watering thing. it is perfict as it is cheap, has no flow restriction, and all you need to do is clog some of the holes and get an addapter.