View Full Version : mushking 2gb help
i can't seem to get this ram working at 1t. if i set it to 1t, i have to do a cmos reset. i currently have them running at 240 and 2.80 (set at 2.7 in dfi bios which overvolts to 2.8). any suggestions?
bchur83
02-03-06, 10:02 AM
That ram may not like 1T. If it isnt stable, or doesnt post, then change it to 2T.
What's the product number for those modules?
We have few kits available and I'm not sure which one you're talking about :)
Eldonko
02-03-06, 10:09 AM
Post your settings and we can prob help. :) Which kit you using?
i'm using the 2gb pc4000 dc kit; as for product model, i'm guessing its 991483. and i'm using the recommended 3-4-3-8 @ 2.8v with my fsb at 240. i also tried 3-4-4-8 and it also gave the long beep requiring a cmos reset.
Duonger
02-03-06, 10:44 AM
pRS317
call in and we can walk you thru the install... 800-569-1868
Mike, chris, brian, ian, krista, diane, christie are all in...
Duonger
i finally resoved the issue with the ram. it would seem that my dfi lanparty nf3 board doesn't like the ram, so i went back to my trusty k8n neo2 platinum board which is getting along quite nicely with the ram at 250mhz fsb.
RAM Bandwidth Int Buff'd iSSE2 : 6879 MB/s
RAM Bandwidth Float Buff'd iSSE2 : 6808 MB/s
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.