PDA

View Full Version : P4ht


Vipersfate
02-15-06, 12:25 AM
Well, first off, HI FORUMS!

Second


I am interested in OC's and other aspects.

I have:

Pentium 4 3.0Ghz H/T Prescott (Socket 478 :D)
Intel 82865GLC Motherboard (Codename : La Crosse)

I'm basically wondering if my computer is overclockable, and possibly my video card, but thats another section (PNY Verto 6600GT)

Can anyone suggest or give me information regarding if my setup currently can be OCd? Thanks!

Hamm3r
02-15-06, 02:23 PM
If you can find option that allows you to change frontside bus then you should be able to OC it. Intel boards aren't really overclocking friendly but it can be done.
With good mobo that Prescott should reach somewhere between 3.4-3.8Ghz.
Graphics card can be OCed, look @ the video section of the forums for info on OCing.

dfonda
02-15-06, 04:47 PM
If you go into your bios look for the advanced tab, try changing things that are auto and make them manual that will show you your choices. Chipset for example will allow you to make changes to your memory timings ect. Write everything listed down on a piece of paper. Exit without saving your changes. Post whats available in your bios here and we can give you a starting point. Here for example is what I have in my BIOS.

Oh and post your memory.

Here are my settings.
CPU EXT FREQ=260 @3.64GHZ
Dram Freq=400
AGP/PCI=66/33
CPU vcore=1.65v
DDR Ref 2.75v
AGP1.6v

Chipset

CAS=3
RAS=4
RAS to CAS=4
PRECHARGE=8
BURST=4

Idler timer=Infinite
Dram refresh Rate=15.6usec
Graphics Aperture size=128mb
Spread spectrum=disabled
Ich delayed transaction=enabled
MPS Revision 1.4

Vipersfate
02-15-06, 06:52 PM
Thanks a bunch. I'll probably get the write up tonight of that information, and hopefully I will be able to do this (of course, when I get my backup PC :D)