G.Skill F1-3200PHU2-1GBZX Unstable

[mudpark41]

I have G.Skill F1-3200PHU2-1GBZX memory running in my DFI UT Nf4-D. I tried to manually tweak the memory timings and I am running them at lower than 200 mhz with 2t Command Rate and still they are unstable.

I tried running Dual Prime Blend Test. Core 0 Failed in 5 minutes Core 1 Ran for about 30 minutes untill I stopped it. I have this memory already running with VERY loose timings and I cannot understand why it is failing to preform stable at these settings.

I am running the memory on the 133 Divider with a HTT of 295 so actually frequency is around 188-190 mhz.
vDimm @ 2.8
Northbridge @ 1.7
And the Cpu is Dual Prime Small FTT Stable for 14+ Hours.

How Can I get these sticks stable?

http://quitethegamer.com/staff/matt/a64tweaker-cpuz.JPG

[bryan_d]

Have you tried using a lower voltage? I have used those sticks before and they worked pretty well in numerous systems, (AMD/Intel) at stock volts.

Are they overheating? What does memtest86+ fail at?

Bryan d

[Mustanley]

I would advise you to drop your cpu overclock while testing new memory.