I Just Joined SETI yesterday

[oc jason]

Well i am now a OC.Com SETI member,and am gladto help.

Big UP to Themalac for walking me through it. Well i just though id post to say im lending a hand.

Cruched 6 units since yesterday, im getting 4.82hrs per unit. Is that good?

[wizardloader]

Welcome Jason. I see you on the boards alot. Thats fine work I get about the same as you do. Been on team a week now and lovin it...........Again Welcome:D

[chawken]

Welcome to the team Jason. Your time does look a bit high - if the 'AR' is an ave .4xx AR. On .4xx AR's with a 1.4@1.533 (10.5 x 146) I am getting about 4.3hrs per WU. You have a higher fsb so you should be between 3.90 - 4.25hrs.

Glad to have you on the team.

[Sir-Epix]

Welcome to the team. Hope you have a good time crunching, and your times are not that bad.

[Cy]

Welcome to the team! Sounds like you have a nice little cruncher there, thanks for using it with the ocsetiteam.

Cy

[Thelemac]

Welcome aboard! ;)

[TC]

Nice to have you as a member. Your time is maybe a little high, but not too far off what my 1400 tbird at 1600 averages. I wouldn't worry about it.

[JAWS]

Wecome Jason!:) Sweet Times!

[JigPu]

Welcome Jason!!

Woah... That sounds weird... Like I'm welcoming myself...

Hope you have good times down here near the bottom of the forums!!

JigPu

[13oots2]

Welcome to The Team, make yourself at home. we're a friendly bunch here. Wish my WU,s flowed off the machine as fast as yours do:)

[zangler]

welcome! glad to see new guys....(like im old around here) but it is hard to get a average time until you do 50 or so...but 4.8 is not bad. i suppose it will probably drop to 4.6 or so by your first 100.

[FRANK]

Welocme!

And Good Luck!

[Basher]

welcome to the team :)

[eobard]

Good morning. (my prefered greeting, I'm not big on welcome aboard) :)

[Mictlan]

Welcome to [OC]Jason, wizardloader and all the new SETI addicts (***cough***) members

[RedDeathDrinker]

Welcome Jason. Excellent times. I manage 1 every 12 hours on my P600, but every little helps!

[oc jason]

yes i noticed that is has dropped since i started, down to 3.9 WU an Hour, so what make the biggest difference in crunch times, mem timings , then mem speed,hen overall speed, or should i just go all out for sheer speed and forget timings,

[eobard]

Originally posted by [OC] Jason
yes i noticed that is has dropped since i started, down to 3.9 WU an Hour, so what make the biggest difference in crunch times, mem timings , then mem speed,hen overall speed, or should i just go all out for sheer speed and forget timings,

I always thought it was fsb that was the most important but recently I lowered my fsb and upped my mem speed and shaved about 30minutes off my average times.

[lonewolf1983]

welcome to the team!
great to have another member to the team

as for speed tips
all out speed is important,but its best to achieve this using as high an FSB as possible
running your memory timings fast will also improve your times
the best way is to test your system and see

[wizardloader]

Will changing my pc2100 ddr ram from cas 2.5 to 2 in my bios help ? Or will it dmg my ram?

[eobard]

Originally posted by wizardloader
Will changing my pc2100 ddr ram from cas 2.5 to 2 in my bios help ? Or will it dmg my ram?

I've never heard of incorrect timings damaging memory, if it can't handle the speed it just won't work. The system may not start or you'll get frequent crashes. Set it back to the old settings and away you go.

[oc jason]

yes that will help and that mem can take it, id go for it