Is Gf2 GTS stock cooler good enough?

[tacobell]

Would be better to put on a borb?

How much difference a borb can make?

thanks

[The Overclocker]

it is good enought for running at stock speed but any furver and you would do getter with a borb, better still would be a small socket 7 or 370 hetsink held on with superglue or artic silver epoxy

[Maximus Nickus]

A borb would be perfectly adequate for your gts, a g3 however requires something more....

[ButcherUK]

my GTS does 240 core on the stock fan, the real limit on the card is it;s memory not it's core anyway.

[charliesav]

i've put a blue orb on me old gts 32mb and at 250/420 temp run up to 56 did a 4029 on 3d2001 on 230/410 and on stock res etc. n
not bad for a 32 meg.

1.4amd running at 1.6 141mhz fsb 512mb sdram kt7a. swifty water block at this moment is cold out side 5 deg. cpu temp on only 22deg at full load... swifty are great...........

booted up at 1.7 but cheap psu 300 watt did not like it and only lasted 10 min's opps... next two cheap psu's.. looking through these forums people talk alot but don't do much. you can run a 1.4 at 2Gb and it will last if you get rid of the heat.

[tacobell]

I think i´ll put the borb.. of course i´ll not be running it in stock speed :D

Just wanted to know because in the near future i´ll be running it with my watercooler.. it´s just waiting for his time right here, under my bed :p

[mw521]

Superglue! Hehe! Naw!