-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
My very first W/C ing setup...Its..interesting...
- Thread starter Angry
- Start date
OP
- Joined
- Feb 24, 2001
- Thread Starter
- #2
;More...The water mixture is distilled water and waterwetter.
max load temps with prime95 are 37C and ilde of 32C.
MY cpu is clocked at 202x11.5. It posts and boots up to 220fsb but my ye old Powmax craps out. ANd this is with a dual PSU setup, which consists of a 145watt PSU powering my drives and fans and the 400watt Powmax running the board and 6800.
I cant get anything stable above 202fsb, even with 2.2 Vcore (with max temps of 39C
) It eventualy craps in prime or 3dmark01. The 12v rail on the powmaxx drops to 11.89 at the lowest and the Vio drops to 3.23v. 
:
Time to order that silverstone....
ANd yeah I know I REALLY need a case....Oh yeah and that is a cardboard shroud...It was the only thing I could find that would easily mold to the h/c. But its damn quite and works great.
max load temps with prime95 are 37C and ilde of 32C.
MY cpu is clocked at 202x11.5. It posts and boots up to 220fsb but my ye old Powmax craps out. ANd this is with a dual PSU setup, which consists of a 145watt PSU powering my drives and fans and the 400watt Powmax running the board and 6800.
I cant get anything stable above 202fsb, even with 2.2 Vcore (with max temps of 39C
) It eventualy craps in prime or 3dmark01. The 12v rail on the powmaxx drops to 11.89 at the lowest and the Vio drops to 3.23v. : Time to order that silverstone....
ANd yeah I know I REALLY need a case....Oh yeah and that is a cardboard shroud...It was the only thing I could find that would easily mold to the h/c. But its damn quite and works great.
Attachments
Last edited:
- Joined
- Jun 24, 2001
- Location
- in the garage
Lookin good! It's more contained than my first watercooling
Similar threads
