New Chip For CUSL2-C

[nats]

Hey guys just wondering if you could give me an idea on a new chip.. At the present time I'm running a cel. 566@850. Just wondering what I could step up to that would give me the most bang for my buck.I don't. want to get into fancy cooling or anything. But I would like to get a little more out of this mobo before I step up to a P4.Just wondering if you's had any ideas...
Thanks Nats.............

[Yodums]

Well the main thing to overclocking is heat and eiter way the higher you go the more heat the chip will develop so cooling is the number one thing :)

Whats your current mobo I think your doing good for stock cooling I believe...

What motherboard do you have and what are your temps?

[jazztrumpet216]

Well, anything that's a significant step up is on a 100Mhz bus. Try something in the 800+ range. The faster 66Mhz bus processors (700-766) have multipliers that are too higher for substancial ocing, you'd do better with the 800. I personally like my 600 cause I've got it running at nearly 900 with a crappy Evergreen Tech. fan I got with a processor upgrade a few years ago... really sucks, no thermal compound, etc.... Can't wait to see what this thing will do with the Golden Orb I ordered.

[nats]

I' running a cusl2-c mobo bios 1009. I have a pal 6035(?) and artic silver on my 566. My High end is about 39 degrees.my mobo runs about 31degrees.I have 512mg infinion ram.

[Yodums]

Originally posted by nats
I' running a cusl2-c mobo bios 1009. I have a pal 6035(?) and artic silver on my 566. My High end is about 39 degrees.my mobo runs about 31degrees.I have 512mg infinion ram.

Good temps!