first off, heres what im running,
swiftech storm block
swiftech mcw30 chipset block
danger den nv68 gpu block
2 swiftech mcp655s
1 thermochill he 120.3
hydrx coolant
1 t-line
here was how i was running it
pump1->pump2->thermochill->storm->mcw30->nv68->pump1
heres the problem:
THE FLOW IS ALL MESSED UP! i have no idea what the problem is, there are large air pockets THAT JUST STAY THERE and nothing seems to be flowing correctly and like the tube that connects my rad to my storm is like..not full you know? so here are my questions if you guys dont mind answering...
1. would you guys have a similiar setup if you had the same parts?
2. where should my t-line be positioned?
3. what setting should i leave my mcp655s at?
4. there is a little screw on the back of my thermochill rad, what does it do?
and also, i had a reservoir hooked up but that seemed like a failure, it was an angel eyes uv blue typhoon reservoir with 2 barbs (crappy design if you ask me) and i had a t line setup (RIGHT BEFORE PUMP 1 WHICH IS WHERE I HAVE IT NOW) and my reservoir kept eating all the water i poored down my t-line, but when i covered the res like the water in the t-line was going up down up down and my pump was making weird noises like HIGH NOISE low noise HIGH NOISE etc.
not sure if this is common but when i set the pumps to 5 the water inside was a little foamy, cause the water is traveling so fast? is it because of water turbulance?
anyways, im going to ditch the res cause i dont want to spend more money to get a better one, if you guys can fix my setup WITH the t-line then id grealy appreciate it, any suggestions are appreciated
swiftech storm block
swiftech mcw30 chipset block
danger den nv68 gpu block
2 swiftech mcp655s
1 thermochill he 120.3
hydrx coolant
1 t-line
here was how i was running it
pump1->pump2->thermochill->storm->mcw30->nv68->pump1
heres the problem:
THE FLOW IS ALL MESSED UP! i have no idea what the problem is, there are large air pockets THAT JUST STAY THERE and nothing seems to be flowing correctly and like the tube that connects my rad to my storm is like..not full you know? so here are my questions if you guys dont mind answering...
1. would you guys have a similiar setup if you had the same parts?
2. where should my t-line be positioned?
3. what setting should i leave my mcp655s at?
4. there is a little screw on the back of my thermochill rad, what does it do?
and also, i had a reservoir hooked up but that seemed like a failure, it was an angel eyes uv blue typhoon reservoir with 2 barbs (crappy design if you ask me) and i had a t line setup (RIGHT BEFORE PUMP 1 WHICH IS WHERE I HAVE IT NOW) and my reservoir kept eating all the water i poored down my t-line, but when i covered the res like the water in the t-line was going up down up down and my pump was making weird noises like HIGH NOISE low noise HIGH NOISE etc.
not sure if this is common but when i set the pumps to 5 the water inside was a little foamy, cause the water is traveling so fast? is it because of water turbulance?
anyways, im going to ditch the res cause i dont want to spend more money to get a better one, if you guys can fix my setup WITH the t-line then id grealy appreciate it, any suggestions are appreciated